Hello All
I can not make boot systen command
switch3750s#dirDirectory of flash:/
... 6 -rwx 20437632 Jan 2 2006 06:10:25 +06:00 c3750e-universalk9-mz.150-2.SE10.bin 7 -rwx 1919 Mar 1 1993 10:11:20 +06:00 private-config.text.backup 8 drwx 4096 Mar 1...
please find attached debug ccsip mess and call flow
I suppose call is disconnected by TELCO side
but they told that from CUBE side
call flow is
IP phone -- CUCM -- CUBE -- Telco
Hi all,please help B1#sh proc cpu sortCPU utilization for five seconds: 87%/84%; one minute: 92%; five minutes: 88%PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 324 44008380 461987777 95 0.87% 0.86% 0.83% 0 IP SLAs XOS Even 101 14316976 3...
Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseLX SFP
%SFF8472-5-THRESHOLD_VIOLATION: Gi1/0/49: Rx power high warning; Operating value: -1.6 dBm, Threshold value: -3.0 dBm.
do I need to install attenuator? and what type/model/brand?
I found
show boot
BOOT path-list : flash:c3750e-universalk9-mz.150-2.SE12.binConfig file : flash:/config.textPrivate Config file : flash:/private-config.textEnable Break : no
Thanks a lot.
but I can not see how the non-secure profile is connected to the phone?
when configuring phone there are only standart sip profile.
I mean I want to change configuration of only one phone. not all of them.