Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,If anyone could help troubleshooting my ISDN fault I will gladly give netpro points. I've spent two days and cannot seem to progress.I have two routers A & B located in two different locations. B's purpose is to dial into A when the primary li...
Hi all,I'm planning my first gateway install and wanted to confirm that I have the correct amount of dsp resources for my install.I want to have 120 channels after completion, and already have 2 x NM-HDV2 with 2 x VWIC-2MFT-E1-D1 controllers. From ...
Hi,Last night we patched our ACS services with the latest windows updates. These ACS servers replicate their database from server 1 to 2. After the required reboot server number 2 is unable to start its ACS windows services. ACS logs are non-existent...
I'm attempting to import my switches into Qos Policy Manager in preparation for our Qos deployment. Unforunately we have RME ver 4 which exports it's DCR in a later version to which QPM cannot understand. I've tried converting the CSV file myself to ...
Hi,Has anyone resolved a problem with LMS 2.5.1 (DFM) creating false alerts for 'unreachable' interfaces. My switches have redundant 1 & 2 gig etherchannels running over a campus wide LAN. The network seems fine, our other monitoring software never p...
It's not an SNMP tool but Kiwi CatTools can automatically login to your switches and perform scripted updates. Pretty easy to setup as well. From memory $100 US will get you the appropriate license.http://www.kiwisyslog.com/cattools-info.phpHTH
Have you set the correct transport, config protocols for software upgrade? It's in the RME settings page on the drop down list. I had a similiar error when my server was set to use rcp by default. Once I setup tftp & ssh the IOS upgrade worked.
I'm running into the same problem. From what I can find researching on cisco.com the 3750 isn't capable of returning a temperature reading other than OK or alert. According to the 3750 config guide temperature can be monitored with the following comm...
