Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
The customer has an existing 10.x environment with desktop recording and was interested in enabling some phones for network recording. Is it possible to have both desktop and network-recorded endpoints in the same environment, granted the QM s...
Hello,
cucm and cuc both version 10.5.2.13039-1. For incoming calls, the main line DiD for the client points to an auto attendant on Unity where the caller would then dial the extension of a user. The calls ring through fine but when the user picks u...
Overall, I'm having issues with a VLAN interface (let's say, vlan100) receiving an IP address through DHCP. The network topology is set up similar to this-[DHCPserver] - - - -((network cloud))- - - - [3650] -g1/0/1- - - - - - g1/1/1- [3650]Both inter...
I'm trying to archive a controller's configuration after a config change has been made. I've tried 4402's and 5508's with no success. SNMP credentials and syslog address have been entered in the controller and correct credentials are entered in PI. A...
Hello,I'm assuming this can work with switches, routers, and controllers. I'm running PI 2.1 and am trying to get the configuration archive functionality working. I have both of these options checked under System Settings > Configuration Archive::: A...
For my particular case we found it was due to recording being enabled for the user. I've set the Recording Option: Disabled on the user's line for now. TAC pointed me to Calabrio's support for further troubleshooting.
Were you able to make headway with this issue? I have a customer with the exact same symptoms for a single user on CUCM v10.5.2, Jabber v11.0. Moved her to a new workstation and the issue followed.
Any resolution? I am now receiving this out of the blue with version 11.1(2). Uninstalled, reinstalled the latest 11.5(0) and am still receiving the error.
I'm in the same boat and would like to skip the 22 hour wait. My backup file is 13gb. How was this resolved, were you brave enough to hit the ^C sequence and restart the restore? Hopefully looking for good news here. Thanks!
