Hi all,I have problems when reloading switch or loss of power.the switch has auto config command. the problem is a "Power inline nerver "
example before reload switch"interface TenGigabitEthernet1/0/41switchport access vlan 4switchport mode access"ex...
Can I config webauthe redirect without httpsI try to config for force to http://1.1.1.1but It still redirect to https://1.1.1.1 Here is CLIparameter-map type webauth global type webauth virtual-ip ipv4 1.1.1.1 redirect for-login http://1.1.1.1 redir...
Hi everyone,We got alarms from CTC after we configured NTP on ONS node, anyone could help to clarify us about cause of alarming?Please see figure about alarms on CTC as attached.
HiI found that IPMA service started, however, found IPMA port 2912 is not listening. I used Assistant console tool to test connectivity. Assistant console tool can’t connect to primary IPMA server but backup server is OK.My Call manager version...
Hi Ganesh.H,Thank you for your advice, however, i have question to ask you about this:- Due to i used external database, AD 2003, if i setup password aging such as active period, warning period or whatever on ACS. Will ACS sync date/time all user's p...
Hi Scott,This is output of show version, host cert still valid dateCisco Intrusion Prevention System, Version 6.1(1)E3Host: Realm Keys key1.0Signature Definition: Signature Update S479.0 2010-03-19 Virus Upda...
Hi Scott,Thanks for replyYes, i can shell to the box. However i found that when i issued with 'show health'Overall Health Status RedHealth Status for Failed Applications GreenHe...
