Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,we can't send faxes to Eumex PBX's, because their fax ports are configured to fax only. When we send a fax from a machine connected to a VG224, it goes out to the ISDN Gateway with Bearer Capability i = 0x8090A3 Standard = CCITT Transfer Capa...
Hello,how can I change the speed of the Serial Consoleof an ACS Appliance. The Docu states that the speedhas to be 115200, but my Terminal Server does not support this, so I want to configure this value.Does anybody know if this is possible, and how ...
Hello,I have a Cisco 1721 Router which I use as central side DLSW Peer Router. We use TCP. We now have 15 DLSW TCP Remote Peers active. Peer Number 16 doesn't come up. CPU Load is 5 %, memory is almost emty. SW ist 12.3(6). Because it is already in p...
Hello,on a LS1010 i can configure vbr-nrt Soft VCs.This will guarantee the specified bandwidth to the vc. If there is no traffic on the vc, bandwidth is available for other vcs. If the vc needs more bandwidth, it will get more bandwidth, if it is ava...
Hello,at the ACS server in the user setup there is a fieldClient IP Address Assignment.There I can select a static ip addresss for a client.When I do so, does the ACS only check, if the client uses this IP address, and if not, the access is denied, a...
Hi,you can buy http://software.voipintegration.com/software.aspxthis is the old Cisco Softpone, you can use it as a remote control of a physical phone.ByeJo
i,I don't think that there is such a command on a router. On a switch you can use the rr-queue bandwidth limit [percent]http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_40_se/command/reference/cli3.html#wp1947391ByeJo
Ho Subodh,redundancy is implemented in the DHCP Protocol. Check http://www.cisco.com/en/US/docs/ios/12_0t/12_0t1/feature/guide/Easyip2.htmlYou can also use a boadcast adress as helper adress when you enable ip directed-broadcast in the target VLAN of...
