Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I am not sure if this is the correct community to ask but let me try. We are a Cisco partner currently working towards getting our SaaS authorization. I did the WebEx Calling Intermediate Administration course. I took the course and test and f...
Greetings, I do not understand what is the main difference between "Webex Teem Meeting" and "Webex Enterprise Edition"? Thru the Control Hub I can see that our organization is using both of them with different count of the licenses and I can assign e...
Gents,
I have the following topology:
PSTN <-> CUBE <-> CUCM
I need to build the following call flow scenario:
DID - CUBE - CUCM - Direct Forward to multiple cell phones.
We have a DID number which goes thru the CUBE, thru the CUCM but I do not ...
Greetings, I need a valid design and/or configuration guide for CUBE redundancy on Cisco ISR 4331 routers. The only documentation I found is posted 5 years ago here for CUBE redundancy on ASR1xxx which maybe use the same scheme - https://supportforum...
Hi Everyone,I built a VM using a downloaded OVA template for CUC 9.1(0) although my CUC disk version is 9.1(1a). This OVA template is the last one uploated at cisco.com, and the installation fails with a critical stop. Please refer to the attached fi...
Gents, I know the thread is old but will allow myself to revive it. Do you know if it is possible, in addition to downloading the .wav files themselves thru the API, to download the metadata for given records - such as Dialed Number Identification Se...
OK, I found out how to configure it via SNR but there is a problem. When a call come to CUCM and redirect to CUBE..its showing the ORIGINAL CALLING ID (in my case my mobile number) and the PSTN carrier rejects the call. I setup under the CUCM Trunk "...
If I have understood correctly, ISR4xxx supports CUBE redundancy via Redundancy Group (RG) infrastructure which is similar to ASR. In this line of thought, may I use the configuration file described here for ASR or there are some differences?
https:...
Thanks, Rob! I'm hitting the same bug described in the first post. I will try it again tomorrow with the workaround described here. Any other suggestion?
