Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello,
We are currently using Jabber 11.6.1. In 11.6 UPN_DISCOVERY_ENABLED is disabled by default. Things are fine.
We ask users to login using their User IDs and Password and they don't have any issues.
We install Jabber using the following paramet...
hi folks,new to this Community. Just started using Jabber 12 in the lab environment and plan to push it as a new Global Standard. However feel we are missing the option to select the target CUCM cluster.We have around 10 global clusters across the gl...
hello guys,
Here is my topology:
Crestron Mercury--SIP--CUCM 11.5.1SU2--MGCP--VGW--PRI (PSTN)
Everything is working as expected. DTMF works and all.
I changed the Gateway protocol to SIP instead of MGCP. DTMF stopped working.
DMTF on Cisco End Points...
Hello Folks,
We are planning to go from CUCM 11.5.1SU2 to either SU3 or SU4.
Now, we need to decide on the version. We try to stay away from the latest and greatest. SU4 is still quite new. However, based on the Read Me, doesn't look like a lot of en...
so now, I am using msiexec.exe /i CiscoJabberSetup.msi /quiet CLEAR=1 UPN_DISCOVERY_ENABLED=false so I can select the CUCM server by myself. I click on Advanced Settings and put in the CUCM IP of the server where I want to connect to (my lab server i...
Hi Anthony,
This command is not in this document. I should have clarified earlier. This was given to us by an engineer at Crestron.
Here is what this command does:
Cisco UBE supports dynamic payload type negotiation and interworking for all symmetr...
the issue is fixed. here is what was done.
follow this doc:
https://www.crestron.com/getmedia/e2e1c212-4b6a-46a4-ac9b-f8ecaf4aa8a4/mg_cg_ccs-uc-1_sip_endpoint_cisco_ucm
this above doc is for non-secure RTP. if you have secure RTP, there is another ...
