Good morning I have a Cisco SPA112, latest firmware 1.4.1 (SR5), configured to send logs to Papertrail but it seems to only be trying to send the logs to itself?! Why isn't it using the IP address I configured? This is the message I see regularly whe...
Hi, I purchased a used Cisco UC520 from a business who no longer wanted it. However, they didn't know what the password to it was, so I cannot access the configuration. I would like to know how I can either reset the password, leaving the current fir...
Trying to recover the admin password for the UC500 Unit. Can someone point me to the right procedure to do this?Thank you so much.Victor
Hi, I have some used phones.The phones request status.asp ang login.asp files.Anybody know what is the files syntax?And how to create this files? Thank you. Tony ps.:Good luck, all members of the community and they family in this hard situation!
I am trying to troubleshoot problems with SPA112's and am seeing the following sequence in Syslog: uchDisconnectEpFromNode(), invalid node ID: -1Already has a RTP channel.uchConnectEpToNode(): Error Connecting EP VoIP 0 to Node 0. -93. Can anybody en...
Hello, I have a CME in Version 11 with SIP trunk to the provider, and im having problems with the Call Forward in the phones.When i call to a phone that is forward to another destination, the forward number has to be the DID from the phone and in the...
Hello!I am trying to connect our Cisco SPA50X with the AD of the company. I have the problem that I have several users with the same extension but only one enabled, so when I configure the directory with LDAP all these users appear to me while I need...
First of all, apologies if this is in the wrong group. Cisco messaging is new to me and this is my first post. I was hoping someone could point me in the right direction? I am getting some mixed messages from the installer in head office. We have so...
Hello.I need your help.How can i register spa301 ip phones to free pbx asterisk?
Hi, Can anybody help me to config my spa 112 to my isp ?I have Fiber from MEO-Portugal and I can't configure the voip system. they gave me a voip number but honestly I can't fill the requested data Thanks
I have been encrypting config files with OpenSSL since the Linksys PAP2 days but I can no longer do it correctly. I discovered a thread on here that advises "default digest changes between 1.0 and 1.1 from MD5 to SHA256" and I changed my command line...
Good afternoon,Please tell me how to separate management and traffic by vlan?I was able to bind a static ip to vlan = 100, I connected to the hardware remotely.And how to put traffic on your vlan?
I need help programming the softkey functions on my SPA 514G. The user manual has zero instruction on customization. I guess I am the Administrator too :-( The buttons are currently programmed with the default functions: redial, dir, intercom, dnd. ...
I have some trouble with configurating my SPA504G. Each time I try to configure it, it gives me the warning "failed - authenticate". I thinks it's strange because I have another cisco ip phone with the same configuration and that phone works perfect....
We have setup NTP on two SPA112's and they start syncing correctly as per the settings (Time Server=Auto,Resync=3600) and then they start updating every minute which fills the log up until we update something on the webpage and the cycle starts again...
