Hello, Is there a way to increase the volume of a phone call when using the <transfer> tag in VXML? I am using a 1760 router to make the transfer. Any help will be appreciated! Thanks!
I'm trying to connect Cisco CallManager Express directly to MGC without using proxy server. Everything is working perfect, i'm able to place calls in both directions. When i'm turning call forwarding for all calls on ephone-dn, it's working without ...
I have a 3745 running CME 3.1 and the clid is incorrect on outgoing calls. The 3 digit extension is missing from the CLID. I use the following dialplan:dialplan-pattern 1 123456.. extension-length 4 extension-pattern 36.. no-regSo when I get a call I...
Hello: My configuration is OpenPhone-->WAN-->Gtw3660-->PSTN--------------->Phone Prepaid E1 (America-alaw) Tones : Openphone ========= Ok =========> GatewayPrompts: OpenPhone <======== Ok ========== Gate...
I have a trouble playing IVR prompts over IP Call Legs.I'm using IVR TCL 2.0, and a Cisco 3660 as Gateway, IOS version 12.2(19a).When I play a prompt, in some way is "broken" the capability to hear the called side. However if I don't play a prompt ( ...
Hi all,I use 2511 as my gatekeeper and use Linux GnomeMeeting as H323 client, when I try to register from the client to the gatekeeper, the 2511 crash again and again, here is the info========= Dump bp = 4D1594 ====================== 4D1494: 38BB8E...
isdn Cause code No. 28(that s for Invalid number format).Afer a call gets disconnected the router throws CauseCode #28.(Cisco 3700 voip router)"Hows that this Code can appear" when a connected call was disconnected. Any other reason can atrtribute t...
I have two sites implementinf IP PBXs connected to Cisco switches. On each side I have a Cisco 1841 (IOS IP advanced) with one T1 serial port (point to point). I have to pass voice traffic over this T1 with data on it.Does any one have a document or ...
Hi All,There is no problem on compiling 2621XM with FXO and E&M in configurator, but I would like to know if there is any concern when FXO and E&M running in the same box?Thanks in advance.
Hi...The way i understand it, suppose you are a service provider located in the US with offices in Nigeria that provides VoIP transport for calls originating from Houston. Subscribers use the following digit patterns when making calls:For long distan...
I have a weird issue and need advice. I hard set all my switch ports to 100/Full. I have all my IP phones directly connected to the switches. My PC's are plugged into the phone. I hard set the PC's to 100/half. When running some applications that ...
I'm trying to setup TCL for PREPAID. I'm told by the person who's making the script that no ACCESS-REQUEST is going through to the RADIUS SERVER (FREE RADIUS). Anyone have any ideas?? Here's a debug output...Feb 25 21:36:36.798: RADIUS(0000229C): Con...
We are starting to experiment and test products and designs for VoIP/IP Telephony in SP environments based on SIP technology.Are there any best practice and products out there.e.g. Call ControlGatewaysAccounting/BillingWe are alsin interested in desi...
I have a Cisco AS5400 with Integrated SLT registered with PGW.The SS7 state is running fine, also the rlm-group comes up but if I do show isdn status my first E1 with signaling on timeslot 16 shows layer 1 deactivated while layer 2 shows multiframe e...
