Voice Systems and Accessories - Small Business

Hi, I've had troubles with SPA 525G2 phones at a customer's site for some weeks now:- Calls are silent from time to time- Terminated calls (either via button or hanging up from either communications partner) stay on the display for up to 30 seconds b...

We are using SPA504Gs with SPA500DS sidecars and Asterisk.  We have been heavily customizing the phones, sidecars and server for a particular client.  At one point we had the following process on the Sidecar with BLF working:IDLE = Green, solidOn Hol...

Hello Everyone,I've set my PBX server to auto answer intercom calls on all of my Cisco SPA525G2 phones and it works great...until we connect a Bluetooth headset.  Without the Bluetooth headset, an intercom call is automatically answered on the SPA525...

Hi all,I am looking for a procedure/software for recording all incoming/outgoing or ondemand recording request. Are there some free solution? If not free, wich solutions?Thank you in advance.Luciano

Hi team,I got two problems reported so far that looks quite similar behavior between my customers (let's call it Leg A) and a remote destination (Leg B)Leg A receives a call (we use the SPA122 with firmware 1.3.2) and the call goes on for several min...

Hi, I wanted to get some infor before I spend cash on a BE6000. Is there anything else I need besides the following to implament the BE 6000.Sip trunck, POE Switches, IP Phones, BE6000?Also I have FIOS running which is what I wanted to run the be6k o...

                   Hi, I'm looking to invest in a BE6000 but wanted to get something clear beofre I take the leap, Is there anything else I would need besides the BE6000, POE switches, IP Phones and SIP Trunk proivder? Out main routing device is a So...

Using CCA and  I’m trying to upgrade US540’s software. After the first stage, I’ve this message: Ping researchable test failed from CUE to CCA embedded TFTP server 192.168.0.78 please check ….The message say  that the TFTP server is on IP 192.168.0.7...

Does the UC540 provide functionality for dial-in conferencing using an 800 number? If anyone could point me in the direction of any documentation that outlines the UC540's conferencing capabilities in general, I would really appreciate it.

So I have a VPN setup on a customers UC560 that has been working just fine for close to a year.  The 525 phone worked well at a remote location for 6 months and has been nothing but problems since.I have wiped it to factory defaults, updated the firm...

I've configured a HTTP provisioning server and have set up a Cisco ASA to send out the address via DHCP. Currently this setup works for the SPA504Gs which will get the address and provision correctly. The SPA941s however won't co-operate. They don't ...

Hi Guys,We do have Cisco SPA 525g2 configured with 3 extensions. Line 1 works perfectly just fine (no issue at all). But with the use of the OTHER LINES, i can't seem to make it work. Registrations seems to be fine, audio works for a few times at fir...