I have recently setup a UC540 with SPA508 handsets and am looking for a way to alter the ring tone to differentiate between external calls and internal calls - is this possible?
I have recently setup a UC540 with SPA508 handsets and am looking for a way to alter the ring tone to differentiate between external calls and internal calls - is this possible?
I've been trying to attach a Pantel VoIP door phone to an existing SPA9000. That was not a trivial task as configuring the Pantel VoIP to register with the SPA9000 as an extension results with any other extension being able to call the Pantel VoIP wh...
I have a client whose call flow is as follows:Main number -> Floating Extension (for day/night toggle) -> Auto Attendant -> Option 0 for Operator -> Hunt Group 1 -> Hunt Group 2 -> General Voicemailx501 - Hunt Group 1 - currently only contains the m...
Hello ,I am living in Saudi Arabia and when we receive calls caller ID not showing .I use uc540can you please advice ?Regards ,
So is there a way to do this? Can I route the 1 FXO to FXS for incomming calls (and plug fax into FXS) or something like this and then use that line as an outgoing line when not in use?I don't need step but steps but the basics of how something like ...
Hello,..Does CP-6921 Phone accept to take enhanced license instead of basic license if not available ?
We are gonna implement a new UC560 in our school. We‘ve bought a uc560 and SPA502G. We are used to "hands free speaker function" in presentBasically it just calls others without answering the phone when someone is not close to it.I learnt from this...
Hello we upgraded a UC540 from 8.0.5 to 8.61. After the upgrade we started having call transfer issues. A call would come in to the reception, they would transfer the call to another extension i.e (ext 204). If ext 204 tries to transfer to another ex...
Hi all. I have a client who wants to install a camera for use with MonitorView on his SPA525G2 phones. The only documentation I can find lists the PVC2300 and WVC2300 as being compatible. These have been EOL/EOS. Does anyone know of a replacment I ca...
Hi I tried to update my UC 540 to the newest version (8.6.1). During the update I recieved an error message telling that the Voice Mail is corrupted. Repair of voice mail failed. Since that failture all clicks to config items take very long. Whenever...
Dear,Is there a solution to get Call Detail Record from cisco spa 50xg like a "provisioning" setting ?What i will do, is to have the call history from each phone, and send it to a crm.I have cdr from ippbx but not like a will.Another question, is pos...
I purchased a SPA112 from amazon. To make a long story short. menu and menu entries like setting the time and user lists do no appear. I was just wondering if this wasn't a firmware specific modem for a particular provider with certain menu's locke...
Hi there,I have a little problem with my VoiP phone number. Few weeks ago i bought a Cisco VoiP adapter and then i connected it to the analog phone, it works very well but the problem is that the phone is too slow to make calls. Do i have to set some...
I have a problem that I can not solve.I have a cisco 504G connected to a console 500s -> Elastix ServerI configured some extensions on the console. I used the following string configuration:fnc = blf + sd + cp; = sub 35@10.0.200.19However sometimes, ...
Hi everyoneAnyone know what the technical features that should have the audio file is to upload (uplaload) to function as a UC560 autoattended? All I've seen on the Script Management using the CCA is that the file must be of type. AEFSomeone told me ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: