I was setting up a remote teleworker SPA525G and realized that our Server Activesync is communicating on the same ports. Is there a way to change the ports on the UC520 and the SPA525G? I would really like to roll this out, but it appears as though...
Hello,I am attempting to configure a new UCC Call Connect Server v1.6 installation. I have installed the software successfully and rebooted however now I cannot get the UCC Database Server Service to start successfully. The service repeatedly attempt...
I'm trying to disable the DHCP server on a UC540 running Software Pack 8.0.2 and CCA 2.2(4).I'm trying to delete the data scope under Configuration->DHCP Server in CCA per the instructions in this document: https://www.myciscocommunity.com/docs/DOC-5...
If a device is plugged into a FXS port, could it be setup where you do not need to dial an access code just for that port? The device would never be calling an internal extension so there is no concern about overlap.
Has anyone successfully deployed a solution that converted a recorded audio voicemail into a text based message like an e-mail or SMS? i have a customer looking for this capability and wasn't sure if Cisco had something that could accomplish this or...
Voicemail messages are being forwarded to Exchange email accounts. They would like their voicemail on the UC500 automatically deleted after 3 days. They never want to check their actual voicemail on the Cisco.I set message expiry time to 3 days in ...
Is Mobility server supported on a virtual Windows server at this time?Thanks
I have approximately 10 UC520 systems all experiencing an intermittent call park problem. I am curious if anyone else in the community has experienced a similar problem.Call park is configured and works without issue 99% of the time, however, there a...
Hi Guys,I have our first UC540 in our office for testing. I have been having quite a time getting everything working.At the moment the unit is running the latest software 8.0.2.I am having an issue with voicemail and I can see no logic reason for the...
HiI am having some trouble getting hunt-group reports from a uc520. I have a Linux machine configured with a tftp server. The config for the uc520 looks like this:hunt-group report url prefix tftp://ip/wilson hunt-group report url suffix 0 to 1 hunt-...
We got a LinkSys PAP2T to connect analog fax machines to our Cisco CUCM 7.1.In several forums and communities I found a lot of information to configure the PAP2T. (Jitter, Codec, Passthrough Methode, etc.)But as in other threats I have the same pr...
Hi,I am experimenting with VOIP with following goal:Build cost effective and reliable VOIP solution for a company with two branch offices (US and UK) with about 10 staffs each office.Other general requirement1. For each sites 4 local PSTN lines are ...
Hello,we have a customer that wants to terminate a SIP trunk to an Adtran, and then from the Adtran to the uc560, is this going to cause any problems ?or do we need to have the SIP trunk connected directly to the uc560thanks
When running the Activation Utility, we cant activate the license due to the error;Cannot locate any working network interface or this serial number has already been activated on another machineThe SBS 2008 server is connected to the internet and con...
Hi AllI have this very weird problem (at least for me)I have a UC520 connected to an ASA5510 via Site-to-Site VPN.I can ping from clients behind UC520 to client behind ASA5510.I can ping from clients behind ASA5510 to client behind UC520I can access ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: