VPN

I have an ASA 5505 given to me that I am trying to reset.Reset factory defaults and updated ASA to 8.4.7 and ADSM to 7.1.4. At this point I was still able to connect using ADSM with no username/password.Updated ASA to 9.1.3. This is the only change t...

           I have setup on the SSL VPN ASA scripts_OnConnect.vbs that maps the users P drive when users login via AnyConnect. This works fine. I have a request to run a file once a user logs in via Cisco AnyConnect.    It normally runs when a user is...

I set up a cisco ASA 5505 for remote access using Cisco AnyConnect Secure Mobility Client. The clientsoftware is installed on Windows 7 machinesOnly IPsec is enabled for access, using (ASA)local userdatabase and certificate (company CA enrolled the c...

Hi,We would be setting up an remote access ipsec vpn on asa & following the cisco documentation on it.But, can we just download any vpn client available on cisco site to be installed at users laptop or is there any specific ones we need to look at.Th...

I've got VPN built sucessesfully over a few places and now i want to check what is the actualy total lifetime and lifesize of my phase 2 connection. I know the command we should use is "show crypto ipsec sa" but it only shows me the remaining lifetim...

Hello,We have many users using the Cisco AnyConnect client and to get to our company they go to vpn.company.co.uk.  We are changing our company name so we are creating a now FQDN called for example vpn.newcompany.co.uk which will point to our ASA.  1...

Hi,I have a site to site flexvpn configuration that is working with fvrf at the hub's end on a 2921 with no vrf provisioned on the spoke's end. When I configure the vrf on the spoke it seems as if the hub doesnt add the static route of the ip address...

Hello Everyone,I have some questions aboult webvpn configuration.Question 1:How i can configure web vpn on Cisco ASA version 9.1(3)?Question 2:Its possible to configure a plugin to publish a remote desktop application in version 9.1(3)?If yes, how i ...

Hello,i have problems with remote ipsec access on 877.here my config:aaa new-model!!aaa authentication login local_authentication localaaa authorization network default localcrypto isakmp policy 10 encr 3des hash md5 authentication pre-share group 2c...

Hi all,I have been looking for some level of information related to Anyconnect ipv6 & DNS to no alive.my customer is currently facing with an issue, once the Laptop goes in to sleep mode and awakes within their local network the trusted dns does not ...

Hi,I’m pretty new on this item ore actualy on cisco.Wel here we go I got a working anyconnect sslvpn connection. On top of that I also want a CSD Cisco secure desktop. Afther I installed the package the page for admin is up and running https://ip_nr/...