VPN

I have 3 sites which need to be connected with a site-to-site VPN tunnel and all internal networks between them should be routable. Do i need 2 (i have single point of failure, if the "central" one dies i loose connectivity between all 3 sites) or 3 ...

Hi, Vendor provides some services to Client's PC A, PC B which are in Client's network with IPs 10.10.1.2, 10.10.1.3 through Internet, but this requires PPTP VPN on direct Windows PC. After PPTP VPN is established PC A and PC B are in Vendor's subnet...

Good Afternoon,I would like to know if there is a way I can use an XML file to pre-fill the connect field of the Anyconnect client version 3.0.  In the past, I have been able to use an XML file to pre-fill information in the NAC agent so I could push...

Hi Friends,We are currently using a Cisco 887VA-K8-SEC to connect to a Cisco ASA 55XX.This is based on hostname resolving to for example: myvpnentry.mydomain.nlIt all works fine. But i want to add dnssec verification on the Cisco 887VA tomake sure th...

Hello!I'm wondering if anyone can shed some light on this situation.  Our setup is an ASA5540 that maintains split-tunnel VPNs to our clients in a hub and spoke configuration.  We have our outside address set up with a FQDN and many of our customers ...

Hi, We require a full mesh VPN with Spoke to spoke connectivity for our project. We came to know that DMVPN can be used for this requirement. Now we need a central management tool that can help us configuring DMVPN on remotely connected spokes. Pleas...

Can I bind SSL license key from 1 ASA to another , we recently got 5540 and i want to use my SSL 5510 license on the new firewall

Good Morning folks! We are re-evaluating our current VPN infrastructure and are trying to implement a "seamless" user experiece (with Windows 7). In my current testing I have implemented "SBL" but the process isn't seamless, the user still needs to l...

Hi Everyone,I have built a new AnyConnect VPN link which I need to get running ASAP. The issue that I am having is that I can initially get the client to download the anyconnect software and connect, but it cannot ping the default gateway so therefor...

I'm trying to install a PFX file onto a Cisco 1941 but cannot find instructions for this. I've found similar instructions but these are for ASA's and seem to only give instructions of doing it via the wenb interface.Can anyone point me in the right d...

Hi EveryoneASA:          8.2(1)11I have a really weird issue. We have IPSec client VPN profiles ProfileA and ProfileB. ProfileA is for ITSupport and ProfileB is for general users the only difference is that we are allowing the IT Support to access a ...

Hello!I have 2 offices. And 2 providers in each. Can i use Cisco routers\asa\etc. to accomplish this:1. Make 2 vpn tunnels beetween offices - each one based on "wan1_office1-wan1_office2 and wan2_office1-wan2_office2" scheme?2. Make them load balance...

So I find out that all my problems with HIPS and Anyconnect are due to incompatibility between McAfee HIPS and Cisco. Has anyone else seen this? Is there a workaround?                   Running Windows 7 x64Have tried verions 3.0.x, 3.1.x of Anyconne...