VPN

I'm wondering, is there any functional differences, when used in STATIC NAT, between these two lines in the ASA configuration?network-object 10.100.100.1 255.255.255.255OR ELSEnetwork-object host 10.100.100.1

Hi all, I have a problem with my hairpinning setup on ASA 8.4.1I'm using the subnet 10.0.0.0/16 for my network, and I used 10.0.1.0 for VPN.I have the same security-level permit intra-interface.Initially, I made a pool for the whole inside subnet so ...

Hi,I want to set up our ASA5505 firewall to allow access from the Cisco VPN Client software can anyone help.I have nstalled the client software then tried using the VPN wizard to set up the connection without success, I am running Windows 7 32 bit an...

Hi,I'm having some series issues with an C837 and ezpn.I've tried 3 different clientsWindows Xp - 5.0.07.0290Linux - vpnclient-linux-x86_64-4.8.02.0030-k9Linux - vpnc 5.3 and 5.1The issue is that vpn work correctly about 80% of the time, but some int...

I have a asa 5505 having a ssl vpn which allow me to connect  the server using anyconnect  and allow me to browse the internet but doesn't allow me to have an access the server  what can be the problem ? Please suggest a solution

Hi,can anyone please tell me about the TEK and KEK in GETVPN.I know that the TEK is the IPSec policies that used to protect the traffice between the GM.Whether KEK is generated by KS or we need to configure any specific config in the KS, and how can ...

Hi, all,Assuming a typical senario that inside network and VPN pool are using RFC1918 address space, anybody can explain to me why NAT exemption configuration is needed for VPN access? 8.4 does not have NAT-control concept, so it is not a requirement...

HiI searched a lot but didn't find any place usefull like this so I ask my question directly here:I wanted to know if cisco pix 7 support for custom algorithm for vpn? and whether support live monitoring of VPN connections?Thank you.

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-par...

I run windows XP via Bootcamp on my MacBook Air.When I attempt to use AnyConnect to establish a VPN connection, connection fails with error: VPN client driver has encountered an error.Any suggestions?

We are running IOS 8.2(4).  We setup Load Balancing on two ASA's and authentication through a Radius server. After we disconnect the Cisco VPN client and reconnect it,  the Cisco VPN client would not connect and display the error message:            ...

Hi there,I have a friend who wants to encrypt all data traffic internally on his network.Network:3 sites, all connected by metro ethernetFirst site, 100M metro-eSecond site, 50M metro-eThird site, 50M metro-eUsing static routingOnly wants to encrypt ...