VPN

Hi,how can i configure a cisco vpn client security with the password+tokennumberWith SSL VPN and AnyConnect i can configure a secondary authentication, this works. On a customer site i have seen that this is also possible with the vpn client?For exam...

HiWe have installed Cisco AnyConnect VPN Client version 2.5.0217 for window and Linux machine.It works fine on Windows but not Red Hat Linux.Here are the error, anyone has any clue for this issue?Thanks in advance for your time and help.gy===========...

We have four locations, fully meshed via IPSEC tunnels and running EIGRP.Each location has has a dedicated WAN connection with a static IP address.I'm looking for a solution where if one branch loses its dedicated WAN connection, it can dial into the...

I have attached a simple diagram of the setup.I want to setup IPSec VPN site-to-site setup between branch office and headoffice(LAN). Both sites are having ASA5520 and i was able to setup vpn tunnel between branch office and LAN but without linux fir...

Hello experts ,Our client has 40 branch offices with cisco 1841 routers connected to head office(HUB) with two Cisco 3845 routers ,every branch has two different connection to the hub ,one connection through fiber optic the other through point to mul...

Hello. I'm hoping someone can clarify a couple of questions about setting up a VPN using RV042 or RV082 devices.I need to setup a point-to-point VPN connection between two small offices.  We have a VPN that's working now, but it's a problem when the ...

Hi all,I'm successful config remote access on asa5520 on my company.Diagram: inside (192.168.176.0/24) =>>ASA5520 =>>outside (10.1.27.0/24).Outside network (10.1.27.0/24) can access internet, but when I use VPN, it cannot.I can full access to inside ...

Hi All,I have a uc500-advipservicesk9-mz.124-22.YB6.bin configured to accept SSL VPN connections.The problem that I have is that I get a certificate error on my laptop when trying to launch AnyConnect (even if I accept the certificate and install it/...

I'm try to upgrade all my ssl vpn clients but for some reason its not seeing the upgraded software. I  used the followinig document but was unsuccessful.  I'm running version 8.05 on the firewall and ASDM 6.2(5).  Can anybody help with this?