VPN

Hi all,i have the evaluation ACS 5.0 version installed and have an issue with the local certificate.I want not use a self signed certificate but a company certificate.I did the following steps :1. In System Administration/Local Server Certificate/Loc...

Hello,I am in the process of preparing to upgrade our ASA to software 8.x to add support for the Anyconnect client, as we are looking to provide VPN connectivity for Win7 and 64 bit computers.I have two questions.1. I want to know if we will still be...

I am creating a VPN network of  7 ASA5505 s.    One device is the central or hub device.( Attachmnent  Main5505)All ASA5505 devices running  ver   7.2(4)there will be site to site tunnels to 6 other 5505 s across the internet. Currently there are 4 o...

Hello all,We were able to establish a VPN connection from our ASA 5510 to a Windows XP laptop using the VPN Client. However, when we tried accessing the internet or any of the files from our network, the request could not be found. We tried pinging d...

I've got a site to site ipsec vpn setup between myself and a nother location. At my site is a Cisco 877-M at the other site is ISA Server 2006.The ipsec to site2 is up and I can ping machines on the LAN in both directions.At my site port 80 is forwar...

I cannot even see my customer connecting to the line,router info3845IOS c3825-ipbasek9-mz.124-8c.binline 1/6 session-timeout 20   no exec-banner exec-timeout 0 0 modem InOut autocommand  telnet 192.168.80.2 1389 terminal-type vt100 no exec transport ...

Hi all!I’m trying to configure DHCP for an IPSec VPN on an ASA5510 8.2(1), but just can’t get it to work.On the same ASA5510, I have about 20 working IPSec peers, using either EasyVPN (with nem) or local pool addresses. The new tunnel -group I’m conf...

HiI am bit new to this and have a question about a new VPN link I have been asked to set up.I need to set up a VPN link to a remote company which is fine. This link then needs to be passed down to a certain location in our building only for a certain...

I'm using the cisco anyconnect client and when forming a connection I recieve "unable to establish vpn". However, the ASA shows me being authentacted to the Clientless portion of the ssl VPN. The command I'm running is show vpn-sessiondb webvpn (show...

HiAfter setting up an L2L VPN between an ASA 5505 and Cisco 3825, I'm not able to ping the inside network.My network for the ASA is 172.28.45.0/24 and for the 3825 is 172.28.53.0/24. I've been told that there may be overlapping in the ACL and all.But...

We have recently moved encryption to the Application Layer of our network, this was a business requirement for other reasons. But from the network department we see this as an opportunity to increase the scalablity and longevity of our routers.We are...

Hello:Is there a way to disable the Isakmp phase I negotiation?The Ospf  tunnel goes down when the phase I renegotiates after 24 hours.Nothing in the logs except Tunnel going down, Ospf losing neighbor.Ipsec is up but Tunnel stays down !!Any ideas?Th...

Here is the problem that I am having.  First off I don't know how to set up the remote access policy in window 2003 for vpn access.  Second when I authenticateusing the cisco vpn client the router passes my VPN group authentication name and password ...

ALL -I am experiencing a very weird issue with a fresh install of a Cisco 2800 at a clientsite. I have configured the router as a zone-based firewall and then moved forward with setting up a Anyconnect WebVPN.The issue I am having is I cannot in anyw...