VPN

I have a workstation that I cannot ping once I install Cisco VPN on it. I ping the server without VPN installed and it responds fine. I install VPN and the workstation no longer pings. I stop the Cisco service and I can ping the workstation.This is a...

Hi,is Cisco VPN Client 5.0.00 support PPTP.?i have been given PPTP VPN credential, didnt find any option in to my VPN Client saying PPTP, it only shows IP Sec over TCp/UDP.Thanks,Dhaval Tandel

I am trying to setup IPSec Stateful failover on a pair of VXR7204 router running version 12.3T. I was told byCisco some months ago that unless IPSecstateful will not be supported by Ciscounless I have AIM or VAM card on therouter. This is what curr...

We have a Catalyst 6506 with IPSEC\VPN SPA which terminates the IPSec tunnels from remote locations, and at first look everything seems to work fine. If we for example restart interface at remote location where tunnel terminates, 6506 stops answering...

Hi,Sometimes,Our vpn tunnel is offten disconnected. so at that time, i captured logs as followings. Please let me know what this means My E-mail : jhlee@datacraft-korea.com Thanks. *Jul 16 10:11:50 GMT: %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSE...

Hello,Got a question about BRI interfaceIs there any way to disable BRI interface manually when primary link is up?I had a situation where both BRI and Serial link were up and runningi reset the primary BRI0/1/0 and now BRI sub-interfaces are showing...

If there's an artical on this, please direct me to it. I have a requirement to control which IP is given opportunity to authenticate to my VPN 3000-series concentrator. I also have RADIUS available, if that can be used in any way, using vendor-spec...

Latest cisco vpn client does not work with newest mac os 10.5. I have it installed and i get a error 51 unable to communicate with the vpn subsystem. Please fix this asap cisco.CM

HI,i HAVE A SITE TO SITE VPN.WE ARE PLANNING FOR SENDING VOICE PACKETS THROUGH OUR VPN TUNNEL.THE VPN TUNNEL PASSESS THE TRUSTED TRAFFIC IN BOTH DIRECTIONS AS I HAVE THE COMMAND sysopt connection permit-ipsecON BOTH FIREWALLS.MY ONLY QUERY IS I THINK...

Hello, I'm currently working on my diploma. The question what I have is, CISCO have many web based GUI management Interfaces for configurating Routers.What technology is behind those GUI Interfaces e.g. JSP, JSF... ?My company want's to decide if we ...

Hello,I have spent days on this and I am at a loss, I cannot get this tunnel up.Two 837 Routers at remote sites, customer wants VPN between sites.I followed the tutorials, i turn on the debugs and ping from each site, yet i see absolutely nothing hap...

hello,i have a question about certification. i have planed to setup a vpn client configuration with an ASA. i want to use certificates, but i dont have CA server. i want to generate certificate from the ASA.can u help me to configure an auto certific...

I'm having a problem creating a VPN tunnel from a Cisco 2801 to the Concentrator.We have 14 branch offices and most of them connect just fine. A few can't create the tunnel. The error I'm getting is:27183 10/24/2007 16:13:15.140 SEV=7 IKEDBG/65 RPT=6...

I can't get client 4.01 to uninstall - continually getting "remove plugin failed". I have heard of a traffic108.msi file that can fix the problem but I can't find that file anywhere. Cisco's manual uninstall procedure didn't work either. Thoughts?

I've got this problem that just started.If I'm sitting on the inside of my network (behind a Cisco 5510 ASA) and connect to a remote network (remote is an ASA also) it connects but wont pass traffic. If i connect my laptop to an older pix I can conne...