VPN

Hello,I got a problem with a Cisco PIX 501.The network equipment changed (Modem) and also the IP Addresses.I changed the IP Addresses on the PIX and on our concentrator where the vpn tunnel will be terminated.So the modem/router is configured with 2 ...

I apologize I do not have the config handy and I am not onsite, but I thought someone might be able to point me in the right direction.I am able to VPN in (VPN client and PIX 501) and use RDP to access the W2k servers on the network, but we have an i...

we have a Cisco 3745 as our VPN end point. customer end points vary between cisco, linksys, sonicwall, watchguards, etc. we have a customer who can not define interesting traffic in a host specific form, thus they have to open the whole subnet up. in...

Hi,I have a problem with auth-proxy using RADIUS - authentication fails, although the Radius server (MS IAS) reports authentication success (I guess this is really an authorization issue):I am using the config described in the attached file.When I us...

Hi all,I bought an Airport Express (AE) the other day to stream iTunes tracks to me distant speakers. I am using a laptop, Windows XP, SP 2. I all works brilliantly.However, the moment I am connecting through VPN (Cisco Client) to my university, AE i...

Hi,Just want to confirm if Cisco VPN client logs does not have any setting that can set the client logs retention. It has to be housekeep manually?Thanks.

I have VPN 3030 server for remote access IPSec. Our media-group would like me to configure our VPN 3030 so remote user can receive multicast streaming? Please let me know, if it is possible to configure my vpn3030 multicast (igmp)?

Hi,I am trying to configure remote access for XP desktops using CVPN client software and a Cisco 805 router with IOS IPSec capable( authentication should be local). The remote desktops are behind adsl router wich does nat translations but allow IPSes...

Hi,We have 2950 and 3550 switches running IOS version 12.1In this version can we implement ssh access?RegardsSKRAO

I have created a site to site VPN between two 851 routers. First subnet is 10.10.11.0 and the second is 10.10.10.0. What do I need to do to be able to make the two networks look as one?

I'm currently using an ASA 5520 running 7.2 for my VPN. We have it configured to verify the machine certificate and then pass user authentication to a microsoft IAS. It works fine, but everyone currently gets an IP from the same pool of address on ...

Good morning I'm writing you because since when I have made Pix upgrade from rel.6.3.5 to 7.1.2, I have seen an increase of the CPU utilization, with the same configuration of the appliance.#sh verCisco PIX Security Appliance Software Version 7.1(2)H...