VPN

I am trying to allow ipsec traffic to a inside vpn device. I have a pix 506e with one public static IP and NAT inside. thanks for any helpMoises Perez

Hi, I use Cisco VPN Client Software Release 4.7.00.0053, connect to a Router which acts as a EZVPN Server, but after each connection, it always broken after 100 to 110 seconds. the Router is C2811 with IOS 2800 Software (C2800NM-ADVIPSERVICESK9-M), V...

After upgrading the IOS of our ASA5520 to version 7.2(1)from 7.0(2), people in our company using Mac OS X 10.4.8 running any version of Cisco VPN Client (4.6,4.7,4.8 & 4.9) could not connect to our company network via VPN. At first the VPN client cr...

Currently I have a 3 remote sites connected to a main one as a backup to a leased line.I have baught a cisco router 2811 with an ISDN card NM-1CE1T1_PRI. the 3 remote sites are connected to the main one at 128k and ,i would like to upgrade them to 25...

Currently I have a 3 remote sites connected to a main one as a backup to a leased line.I have baught a cisco router 2811 with an ISDN card NM-1CE1T1_PRI. the 3 remote sites are connected to the main one at 128k and ,i would like to upgrade them to 25...

I am working on a project called AMR (automatic meter reading) in this project, we are making a call from meter software through MODEM to the remote energy meter having GPRS MODUM with SIM card. after authentation we can take the energy data from rem...

How did I understand how many VPN (tunnel IPSec)configure on Pix Firewall ?best regardsLorenzo

I want to update PDM to the latest version (3). How much is it? I have to buy a service agreement? how much?

Hi,I have a very simple questions that I need a definite answer to. We have a customer with a VPN 3000 concentrator. They have reported that traffic will not travel spoke to spoke ie between VPN end points.I am aware that this is not possible on a PI...

Windows XP SP2 does anybody have an suggestion? but please - not only de-install and install the vpn-software. tanx

How make this in ASDM?I want autheticate the users in AD.Anyone can send prints screens for me?Thanks.

Hi people.I test, log and service all the isdn back up links of a couple of hundred routers. Every morning after the test has been run, they are always isdn failures. After upgrades, and constant monitoring and troubleshooting there are still "failed...

I have 2621 connected to internet .My firewall is connected to fast ethernet 0/1 of the 2621.Since , I am given 16 blocks of the public ip , I am using unnumbered on routre serial interface and creating one network of out side interfaces.I can ping ...

HELP!!!!I have had a Vodafone Data Card for my laptop for 10 months and have been trying desporately to get a connection to a Cisco VPN.My Toshiba laptop is running Windows XP (Fully updated), the VPN Client is Cisco 4.0.5 (C) VPN Client and the Voda...

HiI've configured a pix firewall 7.0 and its configured to accept vpn l2tp connection from outside,when i choose vpn ip pool addresses from inside interface the users can see the devices that locate in inside and communicate with them ,but when i ch...