VPN

Hello, I have a client VPNing into the corporate network and in the pool 10.10.100.x. Client is using internal DNS servers since they have to access private servers. They are also setup with split tunneling so as to use their own internet conenctio...

What is the best way to resolve having so many peers with ASA and non Cisco firewalls. I have a customer with a number of Watchguard and Sonicwall firewalls sites (Up to 10) and we are looking for the best solution to not have to statically enter in ...

I've searched around the forums looking for an answer to my problem but have yet to find anything so I figured I would go ahead and post my issue. I'm able to connect to the VPN and it prompts me for my username/password but I can't ping any devices...

I need to build a lan-to-lan VPN tunnel between two networks having overlapping IP spaces. I've looked at the config guide: http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml#diag ... but I am unable ...

I need to know if anyone has had experience using a lan-to-lan Linksys VPN router (RV042 or similar) to an 7204 router VPN router? What experiences have you had? How is reliability of the Linksys VPN router (mean time, IPSec tunnel drops)? And any ot...

Why is it that on an SSL module, certificate validity dates are different when cheking "show crypto ca trustpoints" and "show ssl-proxy certificate-history" ?Doesn't the "certificate-history" show the current one as well?Which one should be tracked f...

Does anyone know the correct syslog messages that will let me know if my site-to-site VPN is down? Thanks.

I have 4 lines aggregate with a router 7200. (to see attached scheme). I have available 128 public ip addresses. On the interface gigabitethernet 0/2 I have configure one of ip address public to which I have connected a switch. Connected to the switc...

Hi allI have a client with a cisco 1603 unit. I am having issues with the password, the previous company that installed this did not give the password to the buisness owner. I have instructions on how to reset this how ever.I am chasing documentation...

Im trying to do intervlan through PIX but encountered a problem, I cant ping from inside PC 192.168.10.2 to 192.168.1.2. Please tell me what's wrong with my configuration:PC1 (vlan10)----------------------|--------------- |---------------IP...

Scenario: I have 2 PIXes (PIX1 and PIX2) at remote sites each connected with a site-to-site VPN to the central ASA (ASA1). I can ping to and from the ASA1 from either site but I can't ping from one remote site to the other remote site (PIX1 to PIX2)....

Will the PIX 506E ever support MS-CHAP V2? I have been working with the Windows Vista beta and they have removed support for MS-CHAP V1 which is the only version of the protocol my PIX supports. Any suggestions?Thanks in advance.Dave

Hi, I have a 2800 router with seven interfaces. I have one which is outside interface. I have another which is inside to my internal network. I have one more at present which is setup on vlan for public events. IE I keep them seperate. I can get Nat ...