VPN

Hi, I am looking at implementing QoS on a Hub/Spoke ADSL VPN setup. All the VPN connections are configured as tunnel interfaces from the central router. I can't think of a way to apply a policy across multiple tunnels using multiple VPN connections e...

If I have remote locations using site-to-site ipsec tunnels with central location (PIX) and if I want to use certificates, after certificates are issued and distributed to all perticipients, do they have to have live connection to CA or this connecti...

Hi,From the cisco product details, I find that PIX515e UR has gotr a VPN accelerator card whcih can take 2000 tunnels simulataneously. If my network has about 500 internal systems, 6 DMZ hosts all connected to the internet via this PIX, how many simu...

Hello,We have few Cisco VPN clients (ver. 4.6) connected to our HQ over CDMA wireless network. There is the PIX515E (PIX OS 6.3(4)) in the HQ configured to support vpn dynamic map. VPN client can connect to the pix and establish ipsec tunnel but some...

Hello,I have some trouble with VPN. I have PIX 515 with 6.3.4. I use Cisco VPN client to connect to PIX.After PIX I have 6509 with vlan's. PIX inside in native vlan.The problem is that I can't access any host's except native vlan on 6509.How I can re...

I have upgrade my IOS version form 12.2 to 12.3.14T after that I have not able to access my AS5400 box through Telnet.When I try to telnet it gives me username prompt and I have not configure for this.So, why the ask me username.2ndly If i configure ...

Dear AllI have to open a port for microsoft terminal server located inside the pix 515E to give outside users access. Which port should i open?Pls provide me the configuration details if you have.Thanks in Advanceswamy

I am using a 1711 to make a dynamic IPSec tunnel to a PIX firewall. The tunnel is established and traffic flows thru it but ONLY from the 1711 router. That is, the 1711 can ping and communicate with all hosts behind the PIX via the tunnel but none ...

Dear All Professionals,I want to configure vpn connection bet 2 sites.In the central site there are 2 routers cisco router 1841 and 2600 located , remote site has single router 2600.How can i configure the vpn redundancy bet this sites along with lo...

Does somebody advice me or send me an a documents or configuration of a Pix which establish an a tunnel IpSec (VPN) with ISA Server 2003 Microsoft ?Best regardsLorenzo

Hi,I have a problem in Site to Site VPN between 2 Cisco 3662 routers: Issue: I configed the Ipsec Tunnel according the following URL , and after that i can ping the other side of the tunnel , but there are so many packet lost ! http://www.cisco.com/...

We are using Patch Link with CSA 4.5. PL execute new Microsoft patch files from temp directory and then these files modify lot of things. CSA keep asking for user permission, what is the best way For CSA to work with Patch Link other then allow *.exe...

I have some users accessing to my network via a VPDN terminated on a pix w/ PixOS 6.3.These users should be natted (via a global) to access a DMZ.Is there a way of doing this?