VPN

I tried to configure VPN with Xauth using local authentication on 6.2 code and couldn't get it to work. Has anyone found a way to do this? Is it planned for future releases? This pix is only authenticating a handfull of users and Radius/Tacacs+ is...

Hi ,i am trying to establish tunnel between VPN Concetrator & Checkpoint.Tunnel gets establish but after 24 sec it gets disconnected.it say user disconnected ...Please help

Using client 3.5.2. I am behind FW. I can connect to the remote VPN, can ping the machine by IP and name once connected. I CANNOT map the drive I want access to. What is the problem? HELP!!!!

I'm having no luck establishing a VPn between my two 827s. I think it may be due to access-list definations. I had VPN up once, then tried to narrow it down for security. Anyone out there willing to help?Router A is at 192.168.0.1 Router B is a...

Hello,Is the 1601R capabile of being an end point in an IPSEC tunnel with a 3005 on the other side. Is this functionality supported by the IPSEC56 feature set for the 1601?

I'm trying to set up the following:PC1(vpn client)-|----DSL(NAT/PAT)----(internet)----Cisco1750(3DES-IPSEC) |PC2(vpn client)-|The idea here is to be able to terminate VPN's through a DSL device that's doing PAT (NAT overlo...

What is the major difference between doing VPN through PIX or VPN3300 Concentrator box. The customer has a PIX (510) connected to ISP with Full T1. They also have 4 branches and need a VPN solutions to connect to headquarter through Static VPN. The c...

Hi all,I try to form an IPSEC between 1 1751 and 1 2600, but I fail. I had tried any method even my setting is the same as the reference book and cisco web site. So I suspect that the router is not support IPSEC( but there is all the IPSEC command in...

It is well known that Windows XP has issues with the Cisco VPN client. The microsoft doc (http://support.microsoft.com/default.aspx?scid=KB;en-us;325072&) says that, "you may be able to obtain an updated .inf file that makes it possible to correctly ...

We have a PIX 515E as our firewall. We have a second PIXl that we are planning to setup behind the firewall as a dedicated VPN. What port and protocols do I have to allow through the first PIX (Firewall) so that the mobile users can make a VPN connec...

I have two sites both with 806 routers needing to connect back to a central office pix 506. I would like to setup a VPN from the sites to the central office using IPSEC 3des. The devices and pix are already upgraded to handle 3des. The remote site...

W have a PIX 515E as our firewall. We have a second PIXl that we are planning to setup behind the firewall as a dedicated VPN. What port and protocols do I have to allow through the firewall so that the mobile users can make a VPN connection to the...

Hello,We're going to be implementing a password expiration policy and need VPN clients to be able to change them remotely. Currently we are using 3DES encryption with Windows 2000 authentication. When we change the Win2k account to "User must change ...

Hi, I've configured two Cisco 827 with a VPN but it doesn't work.I don't any idea why. Can anybody help me?Both have this IOS c820-k8osy6-mz.122-2.T4.binThis is the configuration of the first router:Almeria#sh runBuilding configuration...Current conf...