Hello, I have a question. Compatibility questions between cisco vpn devices. There is a compatibility issue between old and new equipment. I can not find it.
And asa is vpn equipment ??thank you.
hi,
I installed anyconnect a few days ago. After setting the firewall, it worked well on that day. After that, I can't connect to my university anymore.like this:
0:16:40 Contacting home-rz (IPsec) IPv4.0:16:47 User credentials entered.0:16:49 User...
I setup an ikev2 vpn tunnel from firepower deployed in azure to an ASA in the remote site . the tunnel is up , but no data is being transfer through the tunnel. The acl's are in place to allow data flows between the 2 devices . Any one got this sce...
I am trying to setup a Cisco ASA 5506-X with a VPN using the Anyconnect SSL VPN client. I am able to successfully complete the wizard, connect via VPN, and have configured split tunneling. The computer with the client running is able to access the in...
Hi all,
i try to install Cisco Anyconnect 3.1.14018 or 4.5.04029. I get the following error:
There is a problem wirh this Windows Installer package. A program run as part of the
setup did not finish as expected. Contact your support personnel or pa...
Hi
Having issue with aaa . we have configured aaa but still its not taking tacacs credential , instead taking local credential.
Currently device in production , so before touching the aaa configuration , i should know what i should not do. but...
We have a 7200 router with the VAM2+ card, and one functional GRE/IPSec DMVPN tunnel. We are trying to create another one since these are in an MPLS environment and cant be shared between customers. I believe I may have the answer to my problem, but ...
I need to fine the root bridge in my network. How can I ensure that the specific device is acting as a root bridge in the network ? I need to add some more switches in the network but in transparent mode so I want to confirm that the specific device ...
Hello everybody I'm having problems with AnyConnect and Microsoft Windows 10. I have installed windows and anyconnect (3.1.100.10) in a virtual machine and there is no problem, but in physical machines ( no matter laptos or desktop) the installation ...
Hi,
I have got two different sites, where each site has its own Cisco ASA 5510.
The network looks like this:
Site-A
Outside: 1.1.1.1
DMZ: 192.168.1.0/24
Inside: 192.168.2.0/24
Host: 192.168.1.8
Site-B
Outside: 2.2.2.2
DMZ: 192.168.1.0/24
Inside...
Good day all!
I have an Anyconnect Phone VPN setup where each phone gets two VPN gateways in its profile. We have already verified that when the primary gateway is unavailable, the phone registers automatically with the secondary. However, I was aske...
I have a network-enabled PDU hanging off a 2960-X which in turn hangs off a 4500-X. The 4500-X has management access and I can ping the PDU.
The PDU is in a VLAN and on the 4500, this VLAN becomes an SVI.
Even though, i have full access to the P...
I am setting up a s2s vpn tunnel from my ASA 5510, but am getting error.
ASA version: 9.6ASDM: 7.1
Site A (my ASA firewall):
- My ASA external ip: 201.201.201.201- Local network host: 192.168.2.5 `(There is a NAT rule to send alltraffic to the ...
I am setting up a s2s vpn tunnel from my ASA 5510, but am getting error.
ASA version: 9.6ASDM: 7.1
Site A (my ASA firewall):
- My ASA external ip: 201.201.201.201 - Local network host: 192.168.2.5 `(There is a NAT rule to send all traffic to the ...
Cisco Anyconnect Secure Mobility client ver 4.3.0.3 on Windows10 does not allow to connect Remote (VPN)
Message: Keeps looping the following messages....
2018-02-22 11:10:59 PM Contacting AMERICA. 11:11:00 PM Posture Assessment: Require...
