Hi
I configured anyconnect and doing split tunnel for 4 internal websites. So after connecting, VPN afaptor getting route for 4 servers. So far ok.
Now when we try to connect to any url the urls can not be resolved. How to fix this issue. I want...
I have Anyconnect version 4.1.04011 (have tested version 4.2.02075 as well) running and recently I found I am unable to connect to the ASA. I am using windows 10 machine. You can see from the timestamp that after entering the credentials it drops imm...
We have recently established Site to Site VPN.
The Issue is from remote end , ping is responding fine but I could not ping to remote end local network
I assume if ping is working fine from one side means VPN is okay and it is just a matter of firewa...
Hi
I have a 3rd party that needs to access our servers over a site to site VPN. Their inside subnet is already used on our side. So i have asked them to PAT their inside subnet to another IP address so their inside subnet is invisible to us, but they...
Hello Community,
I have an ASA with client-less VPN configured using smart-tunnelling, everything worked great until we changed the signed ID cert to a SHA256 cert.
We can see the new cert within the browser and log into the VPN as normal however w...
Hi all,
I have a site to site vpn with aws, and i have restricted all the inbound traffic using an acl explicitly by denying any any(for both ip and icmp). still users from aws can access my network and can also rdp in, and also ping my network
Y...
Hi
We currently have site to site VPNs to various 3rd parties. I am in the process of reviewing the current proposals and updating these.
Currently we use IKEV1, aes256, sha-1, dh group 5, lifetime 86400, no pfs
I am planning to use IKEV2, aes256, s...
We're having a Cisco ASA5525 with multiple L2L VPN connections to other companies. At this moment I see there are 70 Active Tunnels:
FW-VPN/pri/act# show crypto ikev1 stats
Global IKEv1 Statistics
Active Tunnels: 70
Sometimes I'd like t...
After reviewing the ASA configuration THINK I am only missing these two lines of config for the 2nd broken vpn tunnel for 172.31.0.0/16 that I am trying to create but I need to understand why and how to add them.
access-group inside_access_in in in...
Our business has about 30 branch locations which are all using Cisco ASA-5505's which connect back to our Corporate ASA-5520. We pass ALL traffic over the VPN tunnel to Corporate.
On corporate end (ASA-5520) we have a object-group created which we ca...
Hello,
I am trying to configure to configure a Dynamic-to-Static IPsec VPN tunnel between a Peplink (or Cradlepoint) with a dynamic IP address and an ASA (5540) with static IP, and is the first time using a Peplink (or Cradlepoint).
LAN1 192.168....
Hi Guys,
I'm having some trouble with users losing RDP access to a remote server throughout the day. The device is an ASA 5506 running ASA 9.5 (1). The RDP server is hosted in Microsoft Azure and is being accessed through a VPN tunnel.
The page on...
Hi
I need to setup a site to site VPN to a 3rd party. We have an ASA 5585 HA pair, They have a Merak pair. On the 3rd party side they have provided 2 primary and 2 secondary endpoint IPs so they are using 2 subnets and may running a separate context ...
