I am performing a hardware upgrade of Cisco ASA to a newer model. I have some clientless VPN portal customisations on the old device. When I export these customisations from the old to new device. Are the setting deleted on the old device?
I am performing a hardware upgrade of Cisco ASA to a newer model. I have some clientless VPN portal customisations on the old device. When I export these customisations from the old to new device. Are the setting deleted on the old device?
Hello!!! We are having problem conneting to VPN, these are the logs: 6|Nov 24 2015|09:27:28|602304|||||IPSE C: An outbound remote access SA (SPI= 0x1D425E55) between 62.x.x.x.x and 58.x.x.x.x (user= cltvpn)has been deleted.4|Nov 24 2015|09:27:28|11...
Hi All We are setting up a new Cisco ASA 5508 VPN and are having difficulties in getting the OWA 2010 bookmark to work, when users connect to the clientless VPN. When clicking the bookmark we always get "this page cannot be displayed". The bookmark...
Hello, how can i configure my ASA to allow a specific public-ip address to connected through Anyconnect VPN session , and block all other ip addresses. I searched Group-Policy but could not find the option Thanks
Hi all, I have been trying to establish VPN connection between Apple laptop and my home Cisco 887 Router. I get connected, however i am only able to ping default gateway - 192.168.1.1. Could anyone please look into my config and help me to overcome...
I'm struggling with the Anyconnect configuration I've tried the wizard and command line. When I connect on my iPhone, I get the banner message, put in my username and password and then the connection fails. On the Windows application, it just fails ...
Does Cisco 5580 9.1.x multiple context support all VPN type(IPSEC and anyconnect)?
Does Cisco 5580 9.1.x multiple context support all VPN type(IPSEC and anyconnect)?
Hi all, I've two internet lines, each one with a static public IP, sat IP1 and IP2, supplied by different ISPs. Each line is the outside of an ASA firewall. The inside of each firewall is on the same lan segment, say it's 10.0.0.2 and 10.0.0.3 I hav...
Hi I've been trying to configure AnyConnect VPN, I've tried using the wizard and also command line, but it will not connect. I get to a point connecting on my iPhone where it gives me the banner from the group policy and prompts for a username and pa...
Hello Team, when i run a packet trace it showing allow every thing but unable to ping the remore device. also showing one erroe nat-xlate-failed .please find the details and help. axletech# packet-tracer input inside icmp 10.0...
I'm trying to set up an anyconnect vpn that's supposed to work by supplying access to a single remote local subnet where a couple of servers exist. I have the issue that there is no connection on the subnet. I connect with the VPN and get an IP but I...
Hello,I want to configure a SSL VPN on an ISR which is getting a dynamic IP from the ISP. I know the configuration using static IP. How do I configure this for a dynamic IP ? Regards, Tony
In Cisco ASA, when I issue the command terminal monitor, crazy debugging of access rules logging to the session. The problem I'm facing is when I troubleshoot VPN tunnel and try to issue the command debug crypto IPSec. How can I make the terminal sho...
Hi all, I'm very new for ASA. My current company wat to setup VPN to user to access internal. So now I'm trying to setup VPNauthenticate with my NPS server. The VPN can connect and acess outside network but cannot access internal network. Would you p...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-05-2024 01:57 AM | ||
10-04-2024 02:27 AM | ||
09-30-2024 11:53 AM | ||
09-30-2024 12:54 AM | ||
09-22-2024 10:52 PM |
User | Count |
---|---|
8 | |
6 | |
2 | |
2 | |
1 |