04-07-2017 02:21 AM - edited 07-05-2021 06:49 AM
We are pleased to announce Beta Refresh Release for 8.3MR2.
Please Register at below link to participate in the Beta Program. Once Registered a separate Email will be received with Software Download Link.
Resolved Caveats
Identifier | Headline |
CSCvb05067 | Local EAP fails after wrong username login |
CSCve01552 | Unknown Username when switching from open to dot1x SSID |
CSCve13183 | AP2800/3800/1800 WCPD Crash with clients connected and can't recover after crash |
CSCuz47559 | error saving config file happens on multiple 2702 |
CSCve34143 | Wlan-vlan mapping not working sometime when ap removed and added back in flex grp |
CSCvd20251 | DP stopped working on 5508 running 8.0.140.0 |
CSCvb93365 | WLC msglog showing a lot of traceback |
CSCvd72432 | LocalEAP LDAP Request With Incorrect Password Lockout Users |
CSCve05840 | Addition of DP show commands as part of show run-config |
CSCvb74948 | AVC - CISCO-JABBER-IM application is getting misclassified as SSL |
CSCvd36259 | ME Controller intermittently Flaps with external AP. |
CSCvd96491 | SR: Rest/API for WLC exposing Assurance login password |
CSCux11777 | 1532 non-root bridge high retransmission and latency rate |
CSCvb62874 | Radio interface Input queue gets filled on Autonomous APs. |
CSCvc49713 | AP generates flood of Received and decoded a DMS client request payload SUCCESSFULLY |
CSCvc81929 | Mobility Express crashes when DHCP screen is accessed |
CSCvd58113 | wlc allowing telnet and ssh over ipv6 on global telnet and ssh disabled |
CSCvd66657 | AP 3802: SensorD stuck in offchannel causing radio stops working |
CSCvd90117 | AP3800 - Radio crashing frequently due to beacon stuck |
CSCvd92166 | Couldn't pass host testie build in the branch 8.3 mr throttle in richardson ads, but can pass in sjc |
CSCvd99909 | 8.3 MR2: AP 3800 - 5G Radio crashes - when SI enabled |
CSCve07524 | In GUI 11ac config behavior mismatch with CLi for different AP mode |
CSCve06701 | Client stuck in DHCP_REQD on flex AP after changing native vlan |
CSCvd43728 | Ap1850 DTLS Teardown after channel change |
CSCve18484 | Clear data icon is not working if other languages like korean,japanese is selected in browser |
CSCve13073 | MC9090 doesn't join with 11g disabled |
CSCve01109 | SXP connection on WLC stays off. |
CSCve21379 | During Auto Provisioning Feature, Radius Server Templates are getting applied but staying Disabled. |
CSCvc44293 | 8.4 - ME UI - Changing Transmit power on UI does not work |
CSCvd67178 | Anchor not deleting webauth req client beyond webauth timeout |
CSCve09531 | v6udp_csum_buf overshooting the buffer resulting in WLC crash |
CSCvc81082 | Polaris XOR: The radio is updated as UP whenever AP's XOR band is configured eventhough POE is low |
CSCve17730 | Kernel panic seen due to wlTxDone in 8.2.151.7 |
CSCux97132 | AP starts CAC timer after rolling back to lower bandwidth |
CSCvd53205 | DCA lists in RF profiles are broken after backup/restore the WLC's config |
CSCvd87065 | WLC crash due to task nmspTxServerTask |
CSCve17355 | Upgrade to WLC - 8.3 software enables 11k & 11v by default on all WLANs |
CSCvc41484 | Corsica: high failure rate in off-channel operation, QCA 2721453 |
CSCvc86951 | AP1850 beacon miss/corruption during downstream traffic test, QCA 02793762 |
CSCvc98310 | AP 1830: 2.4-GHz radio stopped working @0x009915D7, QCA 02797962 |
CSCvd18732 | AP 1810 radio FW Assert @0x0099B2DA in overnight multi-client test, QCA 02818890 |
CSCvd28594 | Client association fail after altering data rates in AP 1830. |
CSCvd28645 | AP sending RTS at 6 data rate when data rate 6 is disabled, QCA 02829301 |
CSCvd77037 | AP1832 sending instant ACK after CTS that block data from client, QCA 02862955 |
CSCve00464 | AP1852 detects high noise level on 5-GHz radio for every channel except the serving one |
CSCve10751 | Clients cannot assocate with AP after changing from DFS to non-DFS channels during CAC, QCA 02910240 |
CSCvb57350 | SNMP trap for "AP Interface Up/down Traps" not getting generated. |
CSCvd69782 | Roaming L3 test was failed with 50% in Talwar and Pata WLC |
CSCvd80962 | 8.3MR2: LWAPP-3-AP_LOCK_ERR traceback observed on WLC for AP2800/3800 AP |
CSCvd81926 | CCX Proxy arp flag not set in IOS APs |
CSCve08894 | Unable to debug VRRP issues unless have devshell access |
CSCvb70551 | COS AP's rebooted due to Kernel Panic-Not Syncing: Out of Memory |
CSCvc81429 | 8.2MR5: AP3800 throughput drop in client scale test with random client MAC addresses |
CSCvd61747 | AP3800: Radio crash due to off channel stuck due to defer_chchange_flag always set to TRUE |
CSCvd91894 | 3800/2800 kernel panic crash PC is at mv_dev_kfree_skb+0xc/0xa4 [ap8x] |
CSCvd96867 | Sanity: radio1FW core found in ap1560 with 8.4.2.52 |
CSCve14081 | AireOS: Same channel has been assigned to both the 5Ghz Radios after capwap restart |
CSCuw45964 | Mobility Express: While Editing a WLAN in HTTP session ,user is getting logged out |
CSCvd37808 | 8510 WLC stopped working - iappSocketTask |
CSCvb04932 | APs not discovered because of wrong bsnAPIfType returned for 1810W |
CSCvd06463 | AMSDU packets tx cause 5sec gap of packet tx to 8821 from IOS AP |
CSCvd44446 | Retried EAP Response Dropped as a duplicate while First EAP Response was not even received on the AP |
CSCve30199 | CCKM PMK (Version 2) message flooding 8.3MR2 |
CSCve23103 | AP3800: False RADAR detection without RADAR source |
CSCve23874 | BARBADOS-Client got associate immediately even if CAC timer start on AP log ,when DFS channel is set |
Resolved Caveats
Identifier | Headline |
CSCvc67005 | 2802 AP drops client ARP packets after web authentication |
CSCvc08052 | DFS false detection on AP2700 |
CSCva90265 | iPAD PRO with IOS10 is getting deauthenticated at times due to M3 timer |
CSCvc86170 | ClickAP FlexConnect Local Auth doesn't work on WLAN with CCKM security |
CSCvd85995 | AP3800:AP deauth client after roaming and doesn't send deauth when client sends qos null |
CSCvd18773 | 8.2 clients unable to authenticate 'Sending assoc-resp with status 12 station' |
CSCvd90669 | Need support for AAA override w/ MAC filtering on RLAN |
CSCvd79597 | Smart License 5520/8540 : Unable to reset HTTP-Proxy on Call home configuration from GUI |
CSCvd70755 | AIR-AP3802I crash due to kernel panic |
CSCvc49492 | AP1852 detects high noise level on 5-GHz radio |
CSCvc98310 | AP 1830: 2.4-GHz radio stopped working @0x009915D7, QCA 02797962 |
CSCvd28645 | AP sending RTS at 6 data rate when data rate 6 is disabled, QCA 02829301 |
CSCvd56581 | Client not getting IP address when moving between SSID |
CSCvd14806 | APs randomly not showing any neighbors on both radios |
CSCvd97103 | IPv4 CPU ACL - IP-Address with netmask other than 255.255.255.255 doesn't work |
CSCvd98548 | Kernel panic inside ForwardFrame function! |
CSCva17630 | WLC sends warm-start trap instead of cold-start during autoprovisioning |
CSCvd54154 | All AP1850 connected to master AP crash in a loop due to watchdog reset |
CSCvd86274 | 1800/2800/3800 Series AP does not send the Platform value via CDP when it is brand new |
CSCvc74876 | 8.2.145.21: Barbados CAPWAP disconnect then stuck in discovery loop |
CSCvd91770 | Trust-DSCP-Upstream broken on 8.2.151.0 |
CSCvd88630 | AP 3800: Ap crash due to 'wcpd' in 8.4 |
CSCve01859 | With FIPS enabled on 5520WLC, 3802AP shows no 5Ghz neighbors |
CSCvc82845 | WLC returns nothing for SNMP get WEB ACL - cldcClientAaaOverrideAclName |
CSCvd36736 | AP in local sw/local auth disconnect EAP-SIM client idle for more than 0.5 second |
Resolved Caveats
Identifier | Headline |
CSCvd40646 | AP2802 - Kernel Panic - Dot11Classifier: Mgmt frame not supported 0 |
CSCvd69992 | AP: 2800/3800 unable send proper sequence# and burst rate upstream |
CSCva44397 | WLC gateway not reachable after disabling LAG |
CSCvc15976 | Trustsec: AP: Not able to enable/disable AP inline tagging and SGACL Enforcement via SNMP |
CSCvb54392 | 3800: MacBook Pro Clients with OS X 10.11 getting stuck in DHCP_REQ |
CSCvd46216 | AP1832 sometimes does not send authentication response |
CSCvd46314 | Standalone COS AP should reject new client if MAC auth is configured |
CSCvd72664 | 1850 AP sometimes tags 802.1q vlan for native WLAN, causing ARP packet drop |
CSCvd74063 | AP1832 Crash due to watchdog reset(wcpd no heartbeat) |
CSCva26821 | Auto Anchor Deployment: Scheduling deletion of Mobile Station fails |
CSCvb77390 | WLC stopped working accessing MAC Address Database |
CSCvd32632 | Standby Controller stopped working @rmgrReboot |
CSCvd42348 | Standby WLC stopped working on performing SNMP Set on bsnDot11QosProfileEntry |
CSCvc85164 | 11k: WNM neighbor report is empty in when WLAN ID is greater than 1 |
CSCvd61977 | 2800/3800 -radio coredump generation may stuck ca_status leading to IPC call function failures |
CSCva33212 | Re introduce auto provisioning feature on WLC 2504 running 8.0 |
CSCva46506 | Flexgroup RADIUS configurations are not pushed to AP |
CSCva84030 | Increase CLI WLC username and password to 128 char for TACACS support. |
CSCva88600 | Evaluation of WLC for TCP August 2016 |
CSCvb71600 | WLC stopped woking after applyng CPU ACL |
CSCvc40852 | 82MR4. Active controller in HA pair shows different socket errors |
CSCvd50044 | System stopped working multiple times on ping rx task |
CSCva88319 | 5508-HA-WLC stopped working with Task Name: TransferTask |
CSCvb64042 | WLC HA transfer download failure with legitimate network latency |
CSCvb93189 | AP drops Retransmitted M3 from WLC |
CSCvd15742 | AP crash with %ENTROPY-0-ENTROPY_ERROR: Unable to collect sufficient entropy |
CSCvd83741 | AP: 1850 unable send proper sequence# and burst rate upstream from AP to MSE |
CSCvd30952 | RM3010L-B-K9 Hyperlocation Module stopped working |
CSCvd81303 | 2800/3800: Limit 'best' DCA to 80 MHz also for RF profiles |
CSCva14667 | GET on Ap groups Table after set - response missing |
CSCvc94648 | Evaluation of wlc for OpenSSL Jan 2017 |
Resolved Caveats
Identifier | Headline |
CSCvd24540 | SNMP System crash when tried to create tunnel with clGatewayTunnelEntry MiB |
CSCvd19354 | WLC crash while editing config rf-profile hsr-mode disable | enable config rf-profile 11b |
CSCuz47786 | FlexConnect AP sending IGMP report to WLC for local switching WLAN |
CSCvb86157 | clients can't connect anymore to vWLC- Instrumented code added |
CSCvc67465 | Flex AP loses vlan mapping if vlan tagging is enabled. |
CSCvd37960 | 83MR2-clients getting re-anchored if critical application is present on client |
CSCvb64560 | CISCO-LWAPP-AAA-MIB: DEFVAL format incorrect for some objects |
CSCvb67724 | 5508 is going out of memory |
CSCvb69962 | Client traps not showing session ID's |
CSCvb98859 | AP in local sw/local auth disconnect EAP-SIM client idle for more than 0.5 second |
CSCvc52210 | After reboot of the Master AP, CMX connector service has to be disabled/enable for Test link to work |
CSCvd33140 | ME 8.4 - Constant increase in WLC Memory reaching 90% and above |
CSCvd35988 | 8.5 5520WLC-HA causing DENY rule on WLC and Telnet&Gui access down |
CSCvb20553 | Coa for session timeout not working using free radius server |
CSCvb53368 | validate rogue clients against AAA not work |
CSCvc11630 | Radio reset in switching to connected mode from standalone |
CSCvc24485 | #APF-3-UNKNOWN_RADIO_TYPE: [SS] apf_utils.c:571 Unknown Radio Type 0 from Standby flooding syslog |
CSCvc65675 | WLC: Constantly increasing memory consumption by SNMPTask |
CSCva72390 | 8.4.1.27 - Corsica in Bridge intermittently stalls show commands ... |
CSCvc03468 | 2800/3800: Packets not beamforming with beamforming enabled. |
CSCvc49263 | RLAN-VLAN mapping misconfigured after moving to secondary |
CSCvc55328 | AP crash due to kernel panic at WlLoadRateGrp |
CSCvc86979 | 2800 AP silent reboot with NUL print every 10 mins continuously |
CSCvc93398 | AP2800/AP3800 MU-MIMO forms MU groups with 2SS clients |
CSCvc95222 | 1810w LAN port dropping IPTV packets when wired device is 100M(QCA 02835075) |
CSCvd20271 | Ap 3800 crash 8.3.104.131 in Monitor mode with wips submode |
CSCvd27285 | ME_1852E : CCO image download re-initiated on the APs on which the Dwnld was alrady completed |
CSCvd29564 | Layer 2 Packet Drop Of CDP Packets for COS APs |
CSCvd35231 | AP1810W: Reload Reason: 0: Unknown aka Silent Reboot |
CSCva99545 | Invalid information displayed in show cert webauth/webadmin |
CSCvb45130 | Part of ATF config is not pushed to uploaded config |
CSCvb62478 | Wlan is allowed to be enabled when FT enabled without FT-psk/FT-802.1x |
CSCvc61652 | m25/1.0 is shown in client info |
CSCvc63169 | Flex AP specific WLAN-VLAN Mapping lost on rebooting the AP |
CSCva99052 | Configuring 1810W to OEAP does not enable DHCP on Local port LAN3 |
CSCvb29996 | 1810W Hardware Watchdog reset crash PC=0xc03b3ffc, LR=0xc008af24, QCA 02698633 |
CSCvb54306 | 1815: LED blikning green - light green even at full power and clients connected |
CSCvc07184 | Media streaming behavior different between 1560/3800 and 3700 |
CSCvd20843 | Beacon stuck due to off-channel stuck |
CSCvd21051 | AP3800: Kernel crash at wlTxDone+0x190/0x688 [ap8x] |
CSCvd51674 | AP1810W: Silent reboot : revert highest power table value |
CSCva81406 | WLC - Unmap deauth reason codes 13-22 from reason code 15 exclusively |
CSCva92917 | Observed Traceback logs in show msglog and logging |
CSCvc83583 | 5520 controller crashed with taskname apfProbeThread |
CSCvc87433 | Webauth with proxy doesn't work after 8.2 |
CSCvc88997 | FRA probe suppression config not saved after WLC reboot |
CSCvd01586 | WLC crash - Task Name: RRM-DCLNT-2_4 | rrmClientCoverageHoleAlgorithm |
CSCvd05332 | After changing AP mode to FlexConnect, AP does not assign IP to RLAN clients |
CSCvd06848 | crash SNMPTask Reason:System Crash |
CSCvd07423 | AP firmware corrupt after power cycle bad mzip file, unknown zip method reboot loop |
CSCvd15404 | Rule creation with CLRuleConfigEntry crashes the controller |
CSCvc07521 | AP3800 sends A-MSDU larger than client can handle |
CSCvd25231 | Collect Stack info for silent reboot of 2800/3800 |
CSCvd33219 | AP 3800: FW hang detected - chatter: wl1: fwHangDetect(357): FTR! |
CSCuz16883 | Address registration issues for mobility scenarios |
CSCva68921 | WISM2 reaperWatcher got stuck on DP0 while retriving crash and crashed |
CSCva77707 | AIR-CT5508 SSO ARP request out redundancy management sent with wrong MAC |
CSCva79367 | Cannot add or delete Syslog Servers To WLC |
CSCvb44979 | WLC Local EAP with 7925 Handshake Failure |
CSCvc04089 | 2700 series AP radio resets reason code 71 RADIO_RC_NO_REPORT |
CSCvc12594 | Controller fails to send SNMP when using untagged interfaces on different ports |
CSCvc78510 | 2702 aux port goes to disabled after the ap is rebooted |
CSCvd53765 | After restarting WLC NMSP goes down on CMX |
CSCuz70879 | MAP reloads on hitting 40 mins timer even when it is downloading image |
CSCva06617 | 8.3Beta :Globally configured ATF mode not applied to newly joined AP2700 |
CSCva20342 | WGB uses incorrect MAC while trying to setup BA |
CSCva31890 | MIB table bsnMobileStationPerRadioPerVapTable has no data |
CSCva39537 | 802.11h configuration not saved after restoring config backup |
CSCva40580 | 8.3:BulkSync on active wlc never completes and is stuck in 'in-progress' |
CSCva83802 | HA: SSH on redundancy management interface rejected |
CSCva91483 | AP2700 failing co-channel fairness with Samsung S5 |
CSCvb11778 | 8.1.131.18 WLC crash on sisfSwitcherTask |
CSCvb48354 | RRM Not updating as per configured on WLC |
CSCvb57779 | APs unable to join WLC in different subnet through gateways with proxy-arp disabled. |
CSCvb61023 | DHCP Option 82(remote-id) not present is some AP |
CSCvb81940 | Vlan tagging for external module removed from Ap after upgrade to 8.3.102.0 |
CSCvc39231 | SNMP GETBULK on cLIpsecProfileTable returns with No response from controller |
CSCvc68156 | Full support for "distance" on AP1572 |
CSCvc79811 | When adding/removing country codes 2.4GHz channels change |
CSCvc83490 | Redundancy Mobility MAC does not stay, Primary WLC's MAC is always set instead |
CSCvd09240 | Local-auth EAP-TLS win10 not working |
CSCvc62277 | 5520 crashes on running rrm commands on task emWeb |
CSCvc85328 | AP1832/1852: Power injector/Normal mode inspite of power supply by AIR-PWR-C |
CSCvd15394 | 3800 AP will reject login for login credentials with childer ~ in password |
CSCuz77859 | Flexconnect: AP specific DHCP-NAT-PAT config does not apply in the WLC |
CSCvb12026 | Client Load Balance export to Anchors Fails with New mobility enabled |
CSCvb51570 | WISM 2 crashed on upgrade to 8.3.102.0 with Task Name: spamApTask6 |
CSCvb89781 | 2700-B AP unable to join WLC: Unable to create temp dir "flash:/update" |
CSCvb97383 | WLC deauthenticating roaming client with idle timeout |
CSCvc33793 | WLC tears down connected AP due to unequal loadbalance between SPAM queues high load |
CSCvc83175 | VWLC does not learn client IP / Client stuck in DHCP_REQD |
CSCvd00067 | wired WGB client is removed from parent AP's association table |
CSCvd18025 | anchor1 wlc does not free client sessions after client roaming to anchor2 wlc-client entries stale |
CSCvd21155 | WLC Crash when multicasting traffic and accessing WLC GUI |
CSCvd21969 | AAA AVC Override - AVC profile retained after roaming |
CSCvd41350 | 83mr2-8500 crash osapiReaper fatal condition at broffu_fp_dapi_cmd.c:4574 |
CSCvd56671 | WLC Crash : Task 'apfMsConnTask_0' in 8.3 MR2 |
CSCvc94524 | 2800/3800 iphone & android phones are not getting ipv6 addresses |
CSCvd00289 | 2800/3800 capwapd init unsuccessful creating 2 capwapd causing WCPD watchdogd reset |
CSCuz45986 | CWA not working on 8500 as Guest anchor with Accounting enabled |
CSCva66176 | AP drop of from Network due to large set of Mobility groups in down/down |
CSCva95121 | Stale IP route left on Flex AP config if booting up in standalone mode |
CSCvb13666 | WiSM2 crash with Task Name 'IPv6_Msg_Task' |
CSCvb15871 | aIOS not forward broadcast multicast frames with dynamic vlan |
CSCvb16806 | 5500 MC showing stale connections from MA clients |
CSCvb33076 | WLC: GUI does not allow to change sniffer channel |
CSCvb96009 | WLC Crashed on emweb task on 8.3.102 |
CSCvb99468 | AirOS WLC crashed in emWeb when serving an EmWebForm exclusion-list |
CSCvc66352 | 5500 controller crashed with taskname emweb |
CSCvc74515 | 8.2.121.11/8.2.124.15 : WLC Data plane crash due to fragmentation |
CSCvc78546 | WLC sets Zero 11e QoS for downstream voice traffic when CAC is disabled |
CSCvd39346 | 2800/3800 WCPD slow memory leak |
CSCvd49909 | Kernel panic @ ClientCapabilitiesTracker virtual address invalid |
CSCvb91652 | PMIPv6 Sluggish cli/gui response as well as sporadic lack of snmp response |
CSCvc23724 | WLC crash with EoGRE Heartbeat and skip count configured with value 0 which makes tunnel dead |
CSCvc65568 | 8821 fails 11r FT roam with "Invalid FTIE MIC" |
CSCvc82053 | The nmsp info/probe notification queue is saturating |
CSCvc82376 | EAP-TLS certs and PMK cache are missing on Flex AP after reload |
CSCvd12057 | Flex AVC : Downstream QoS marking not working - 8.3 |
CSCvd56064 | Flex local switching, local auth not supported when PMF is enabled in 8.3.114.22 |
CSCvd61701 | SSH to Standby RMI or Service port Fails |
CSCuq05475 | Controller GUI shows AP's NAT IP instead of private |
CSCvb12565 | WLC stops working when running 'show run-config' command with no APs |
CSCvd48333 | Controller stopped working : emWeb |
CSCvd63242 | Click AP not associating with 11r client in flex connect mode |
CSCux83260 | BGL-Alpha: "lbs-ssc" &" sha256-lbs-ssc" missing in WLC web UI |
CSCva85361 | WLC losing IPv6 Connectivity |
CSCvc41438 | WGB running 15.3(3)JD WGB takes ~500ms longer to scan DFS channels vs JBB |
CSCvb35865 | AP2800 crash for flexconnect-Sensor-Flexconnect |
CSCvc83465 | 8.3MR1: 3800 AP sometime stops sniffing on DFS channel |
CSCva64515 | %SPECTRUM-3-CA_LOGMSG: SPECTRUM LOG: invalid radio type |
CSCvc40267 | WLC sends wrong VLAN for AAA overriden client re-associating to AP belonging to FlexConnect Group |
CSCvc74507 | Fix incorrect commit of CSCuu59589 in 8.0-mr |
CSCvd27065 | EAP-FAST EAP-Chaining on Wired 1810W port does not work |
CSCvd58664 | AP dropping EAP packets on Radio which is seen on Wired uplink |
CSCvd56422 | Error cause 403 generated for 'RFC-3576 Disconnect-Request' |
CSCuz03702 | New mobility:Wired client behind WGB fails to pass traffic after roaming |
CSCva66489 | 11r sess timeout after reassoc causing Deauth 17 mismatch FTIE |
CSCvb94413 | 2800/3800: Fix DAA |
CSCvb97656 | Unexpected reload: Task Name: mmListen on 8.3.102.0 |
CSCvc28168 | WLC set ZERO 802.11e QoS UP for part of the downstream voice packets and APs trust it |
CSCvd06993 | Upgrade to 8.3 requires to reconfigure DNS server IP |
CSCva49263 | 802.11r re-auth failure after roaming |
CSCvb05494 | Wrong format of SNMP trap - mobility flap alarm |
CSCvc09824 | AP2800 band select stats counter show zero |
CSCvc18670 | WLC: Client stops passing traffic on DHCP Reqd. WLAN after sending a Reassoc request but no DHCP pkt |
CSCvc50436 | WGB wired client randomly stuck in the DHCP_REQD state after layer 2 roaming between the controllers |
CSCvc52093 | WLC send deauth 17 to phone in 4-way handshake |
CSCvc65641 | WLC reports tracebacks reported very frequently but no crashes |
CSCvd07215 | AP1810/2800 doesn't learn DHCP lease time from DHCP server and defaults to 24hr. |
CSCvc12566 | New transfer upload command for uploading bundled wlc log files |
Solved! Go to Solution.
04-19-2017 09:50 AM
Has there been any reports of issues with 7925g wifi phones and one-way audio or random re-registration with this code? We installed this last night per TAC recommendation (due to Aeroscout RFID tags not showing with 3802 APs) and this morning we're getting flooded with reports of the 7925g phones having problems.
To note, we didn't have the issues prior to this upgrade when we were running 8.3.112.0.
04-11-2017 06:04 AM
Hi,
Do you think this would help us with TAC CASE 682047948 as we have been unable to work out why despite the idle timeout and session timeout being set to 8 hours - our Apple products are deauthenticated every 9 minutes by the controller.
We're stuck at this point so would really be grateful if you could advise on this please?
Thanks,
Tim
04-14-2017 12:31 PM
Hi Tim,
Just had a brief look at TAC case, it is suspected you are affected by this bug - CSCvb97383 resolved already in 8.4.114.44.. If you can fill the form we can grant access.
regards, Salil
04-14-2017 01:25 PM
Thanks very much for looking Salil!
I've already been granted access but we would like to clarify please - if we install this release in production would Cisco still support us?
This bug is currently holding up a major deployment so any advice you can give us would be gratefully received.
Thanks and have a good weekend,
Tim
04-17-2017 01:17 AM
Hi Tim,
Both TAC and BU would support this. However when CCO post happens it is requested to work to migrate to official CCO release with a reasonable time to upgrade (scheduling maintenance windows /downtime etc)
regards, salil
04-17-2017 11:29 PM
CSCus02070 Flex Ap losing Vlan Mapping and falling on default vlan
Any insight on when this would get fixed .
The workaround for the issue are little cumbersome
Also the 5500 have a limitation on the number of APs in flexconnect group , so having it done via Flex groups is not a viable solution
The current workaround is to
1)detect if there a mismatch in vlan-wlan maping
2)Push a template from PI
04-17-2017 11:32 PM
Hi,
The bug is in U state. If you do observe this issue for your customer, I would recommend to open a TAC case and provide the required information.
regards, Salil
04-19-2017 07:25 AM
Hi Salil,
Thanks for your help again. We seem to have had a more negative reply from TAC about levels of support. Could you please take a look at the case and put a note on with your recommendations?
Thanks again,
Tim
Here is what TAC have said:
"
My name is Mohammad, I am the escalation engineer of the Wireless team who is handling this request for you, Bayan reached out to me yesterday trying to get more information on this, and this is why I decided jump in and email you directly.
If the end customer decided to use the Beta version with no recommendations from Cisco TAC/BU, then it is to be done at their own risk, since the action was not recommended by TAC/BU in the first instance, then the end customer owns the decision to proceed, but Cisco are limited to troubleshoot the issue itself and any other issues that might appear after the upgrade.
The purpose of Beta images as I’m sure you will know, is so that we let our customers test it and we should still support them, but you need to be aware that these images might be affected by more bugs than the normal/CCO images.
In summary, you can ask our your end customer to upgrade if he wishes to, but we need to be specific to our main issue, in case any other problems they face, will require a TAC case to be opened since the upgrade was not upgraded through the TAC/BU recommendation."
04-19-2017 07:53 AM
Hi Tim,
Sure. Let us address this with email..
regards, salil
04-19-2017 08:37 AM
Thanks Salil.
My email address won't be on the case because it is being managed by our outsourcer. Can you put a note on the case for them all to see please?
Thanks,
Tim
04-19-2017 09:50 AM
Has there been any reports of issues with 7925g wifi phones and one-way audio or random re-registration with this code? We installed this last night per TAC recommendation (due to Aeroscout RFID tags not showing with 3802 APs) and this morning we're getting flooded with reports of the 7925g phones having problems.
To note, we didn't have the issues prior to this upgrade when we were running 8.3.112.0.
04-20-2017 07:30 AM
We rolled back from this beta code last night due to the 7925g phones randomly losing SCCP communication. After going back to 8.3.112.0 these phones are now stable again.
04-20-2017 08:19 AM
Interesting. I'll test this in our environment too. I have one of our controllers running 8.3.112 with 7925g phones. We also use Aeroscout/Stanley tags.
05-17-2017 10:50 AM
kdavison, have you had a chance to test this? I ended up setting up a separate controller for two floors I'm testing and am running the beta code on there. I just tested the wifi phones again and found they are still experiencing the behavior. Is there a proper way to submit a bug report or work with someone to collect more data on this issue? I have no problem submitting debugs or doing some testing to get it resolved.
05-19-2017 11:45 AM
7925's are now EoL. I don't think Cisco will fix issues with them even if it's a WLC code bug. Do you have any of the 8821s?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide