Wireless

good afternoon everyone, is there any way to create guest ssid for guest internet access without controller and vlans? I'm trying to see if i could configure it this way so it can be connected to any router and provide basic separation from main and ...

Can anyone tell me where I can manually renew dhcp ip from AP2802I want AP2802 dhcp release or renew ip ,thanks

hi every one, right now  i have problem with a bridge 1310g  i can't console it at allwhen i did it give blank screentried two different  cables and i did use the com port with a different device and it is  totally working but no luck with the bridge...

Hello.I have a 3504 with 8.5.131.0 software. I have a few AIR-AP1815I-B-K9 connected but I am also trying to get my previous AIR-CAP1602I-A-K9 to connect. In the past the AIR-CAP1602I-A-K9 were connected to 2500 WLC. Is it possible to convert the AIR...

Hello We have a corporate network where we facing some issues with the access point 2600 series .  . The problem is like this - The ap-s that are using  channels from UNII3 are not working for Corporate network but they can connect to GUEST network ....

Hello Team.    is it possible to disable the AP console port after it has joined the wlc, configured, and deployed? the goal is to the lock down the AP once it has been deployed/installed. would the "no exec" command provide the ability to lock down ...

HIRan WLC 5520 on 8.5.140 code through Cisco CLI Analyzer, this error message came upHigh CPU on task " emWeb 6367 " with 87 % utilization, contact TAC to identify the reason These are not in production yet (next week) So currently only running as a ...

network ASA-->4507-->2112 WLC--->AccessPoint Everything was working prefect till two week back. Suddenly people started complaining about they are not able to download new messages on outlook app . App receives notification for new emails but it emai...

Hello Experts, It is understood the minimum server requirement of High end installation of CMX is 20vCPUs & 64 GB Ram.However there’s a customer deployment wherein the deployed CMX instance is likely to run on maximum capacity. Will increasing the CP...

Hello Everyone,   In our deployment, few of the users are getting "Limited or No connectivity" warning in anyconnect NAM. Though there is no impact on his connectivity, the user gets proper IP address and he is able to ping his gateway from his syste...

Hello All,We have disabled WPA1 on all of our WLANs except for one. This one WLAN is for wireless printers only, and we have a bunch of old wireless printers that don't appear to have WPA2 as a security option.We were thinking of possibly creating an...