Wireless

Hi Team, We are looking ISE hotspot HTMLpage setting in ISE 2.2. Currently we re using Guest SSID page through WLC. We have customised Login page and upload into WLC. Now we are planning to move guest authentication from WLC to ISE and we want to use...

We want to be able to leverage our existing wireless infrastructure to provide shoppers guest internet access.  Our locations use Cisco 3700i access points that are managed by a pair of 5520 controllers in our data center.  We'd like for the guest us...

Hi Guys I am trying to find out some information on the max ethernet cable distance a 1572EAC can be powered using a 3850 with UPOE?  Thanks

Hello All,Wireless Controller: AIR-CT2504-K9If I create a NEW Wlan that is not yet associated to Any AP or AP Group, etc... Why would saving/applying settings to that WLAN cause all of our SSID/Wireless Networks to drop momentarily?If this new WLAN i...

Hi Guys, I have WLC model 5508 FW 8.0.140.0. and all my AP channel in channel 1. RRM is auto enable! what do you think the problem? Thanks for all Mohammad

Hello Everybody, I'm instaling a Controller Cisco WLC 5508 with ISE 2.2 for a customer, however the authentication method will be using OpenLDAP that do not support MSHAP, and all internal user are using appliances with Windows that with native suppo...

Hi everyone, in a FlexConnect branch environment we report on the switch (3650 or 2960) several times this log entry: %SW_MATM-4-MACFLAP_NOTIF: Host xx in vlan yy is flapping between port Gi1/0/32 and port Gi1/0/33 I can understand that this will hap...

Hi All, I have enabled this "config ap dtls-wlc-mic SHA1/SHA2" on the controller for this error "*AP has SHA2 MIC certificate - Using SHA2 MIC certificate for DTLS." Now i want to remove that command. How to disable it? will this command affect the a...

is it possible to have one SSID which is mapped to different VLANS and how would i go about it because at the moment i have 2 SSIDS which are using the management interface because they are used at different sites and are using different VLANS but th...

I have 2504 WLC with Radius Authen. I set "Max Concurrent Logins for a user name" = 1. But user can connect to wireless by many device per an UserId.How to limit connection? One user ->one device 

Hi All, I am setting up internal web authentication in a WLC. After clients are connected to WLC, they immediately get redirected to http://go.microsoft.com/fwlink/?LinkID=219472&clcid=0x409. I am not sure why clients are redirected to this URL.  Sec...