Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
to install the licenses no charge and only shows the evaluation licenses please your help , in the Cisco Prime displays the following error loading MSE licenses MSE LICENSES FILE COULD NOT BE INSTALLED THE TOTAL LICENSE LIMIT HAS BEEN MET OR EXEEDED...
Hi,We are trying to investigate ways of blocking torrent traffic on our WLANs and currently testing the AVC feature on a pair of 5500 WLCs running 7.4.100.WLAN traffic is anchored from a "Campus" WLC to a "DMZ" WLC. An AVC profile was created on each...
Hello I have two virtual controllers. The first one I backed up the config to a tftp-server and then restored the config on the new controller. The problem is that the ap:s cant join the new controller that has the same config as the old controller. ...
Hi All,We have requirement from client to enable Optimized Roaming.I am aware that before configuring Optimized Roaming Interval and Optimized Roaming Data Rate Threshold we have to disable 802.11a and 802.11b network. But,1. what should be ideal val...
Resolved! Need to enable Client-Link feature
Hi All,Please help me. I am new to Wireless. This is my first wireless call.We have requirement from customer where we have to enable Client-Link feature on all the AP's from Controller. There are total 85 AP's across customer location.I found below ...
Resolved! Wireless Control Center PAK
I installed Wireless Control System on a virtual 32bit Red Hat machine. Now I need the PAK to license it. Along with the software CD, I was given the following four license packs: Cisco One Mgmt Prime Infrastructure LMS 4.2 50 DeviceCisco One Mgmt ...
I was wondering if it is possible to create different DCA lists for different AP groups.
1st question Wlan1 has Gold policy assigned with a cos value of 5.802.1p maping is enabled.Swichport trusts cos, mls qos globally enabled. (c3560) 3560-PoE#show mls qos interface g0/1 statiGigabitEthernet0/1 (All statistics are in packets) cos: incom...
Hello Guys, I have a little Cisco Wireless testlab. WLC4404, WLC2504, AP3502i, AP1142Code is 7.0.252 (also tested with 7.6 and 8.1 on wlc2504, made no difference...)AAA server is Cisco ACS 5.4 The AP's are grouped together in an H-REAP group.DHCP Req...
Hi all this is my environment, two wlc 8520 in HA foreign, two wlc 5508 in HA configured anchor, one ssid configured for guest access and cisco ise for captive portal with use of CWA. For dhcp/dns/http redirect we open firewall port from dynamic inte...
Hi All, I am working on a guest and corporate solution for wireless and have followed the guest access solution from Cisco. But, i am having some doubts regarding the data traffic path. Attached is my high level design. red line indicates guest traff...
Can someone assist me with basic CLI configuration for the Aironet 702i access points. What is the default username and password for logging in to the Aironet 702i access point? After I have logged in to the access point with the console cable, what ...
Can a 1572 outdoor AP be put into an Autonomous mode, or at least a Site Survey mode so coverage areas and signal strengths can be tested without the need for a wireless controller?If so, is that what the sku "SW1570-UL01A01-K9 SW Cisco AP1570: Uni...
Hi All,I have access points in flexconnect (HREAP) mode in my network.There are two profiles which are centrally switched across the WAN network, basically for guest internet access.Now the problem is I am unable to manage the traffic in those profil...
Hi,I'm a bit confused about the new mobility features in the cisco 3850 switch and if they can be integrated with older WLCs.I have a 2504 WLC which currently has a guest SSID configured to provide guest access. I will be upgrading this controler to ...
