Wireless

Can anyone please explain about siso,mimo, mu-mimo, beamforming and multiplexing..?( in simple words) Yes..! there are so many documents and videos but still not understanding properly. Thanks Ravikiran S

I need help on getting the specific OID to list the WLAN SSID configured in our Cisco WLC 4400. All I can see from the SNMP Object Navigator Tool is the AP Group to which this AP has been associated with (1.3.6.1.4.1.14179.2.2.1.1.30). I am currently...

Hi, Is their a solution were you can connect a LAN wireless to a hotspot of a provider. De PC's are connected to a LAN (wired or wireless) passing a firewall .The users needs to authenticate via de login webpage of the provider.Is this possible with ...

For AIR-CT5760-50-K9 and AIR-CT5760-HA-K9 WLC, please let me know do we have cisco document showing how to configure the WLC with step-by-step and screenshot. Please suggest.

We have "AIR-CAP3702I-E-K9" some access point giving red indicator led. When the same AP is connected to switch directly it gives green indication. Customer update us cabling is tested and passed, but the AP connected to the wall shows red indication...

HI, prime - 3.0 mse v 10.2 prime doesn't how location and analytic report from mse. can prime show correlated reports with mse? can prime show user names taken from Facebook by mse? prime doesn't show visitor routed on the map. how can i find this re...

Hi, Previously I have been able to enable 40MHz Wide channels on the AC module for 3600 access points as AC would be seen as a separate interface. With a 3700 Access Point the AC module is integrated and hence the AC interface does not show up separa...

Hello, I have a few 1142 APs (not the LAP) and have some phones that are having issues roaming. They seem to wait until there is basically no signal before switching APs. Both APs are setup the same and are on different channels. Same security, SSID ...

I have 10 interfaces in the interface group, all of of them are /23. Can I add a new segment /22 to the same interface group. Would the controller allocate to the larger interface once the smaller ones are filled? Thanks, Jose Zafra

If I am using AC power to power the AP, which lead goes to which terminal? The terminals are only labeled HOT1 and HOT2. Any experience would help. Thanks

I am following this to the letter  http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html I have generated a CSR and got back a signed cert - however when I try to generate ...

Does the 1700 and 1800 series WAPS need the controller to  run or is that just to configure the device? Can you configure the device by connecting to the management port? I have a client who is looking to purchase a couple but does not need a control...

We would like to use 1 controller as the Primary Controller, but we have a large number of AP's on the "Secondary Controller".  Is there a way change a large # of AP's globally on the WLC or in Prime.  Thanks in advance.  Mike

I can not connect to the AP 1602i, Already tried several times via console, but I can not connect, when I connect to a dhcp server he gets an IP, but I can not connect via http, ssh or telnet.Already tested on various browsers and already gave severa...