Hi all, Google's my buddy, but couldn't seem to help me out on this one. When I have a pair of 5508 controllers (running 8.0 code), and the primary sends a config update to the secondary, how is that encrypted? DTLS? thx for any helpful info.
Hi all, Google's my buddy, but couldn't seem to help me out on this one. When I have a pair of 5508 controllers (running 8.0 code), and the primary sends a config update to the secondary, how is that encrypted? DTLS? thx for any helpful info.
Hi my name is Ivan, i have an issueI have one cisco wlc 5508 with ios 7.4.100 with a ssid is working with 802.1x peap mschap v2 with mac filter, and I need configure in the web page of the WLC Security > Mac Filter, a MAC and one IP Address permanen...
hi all can you help me i need to buy access point with only 1 km diameter which model will help me ?
Hi ! can anyone tell me which kind of LTE Modem is installed in a C819 ? I removed the modem from a 3G C819 - it's a Sierra wireless ePCI Modem. thxHans
Is Cisco NAC Agent compatible and supported on Apple iPad? If so, please provide documentation on how to implement this solution using ISE.
Dear Team, Recently we have sell out Cisco 3850 Fiber Switches (24 and 12 Port) to one of our clients ("WS-C3850-24S-E" and "WS-C3850-12S-E"). These switches will act as Distribution Switches within their network. We have purchased these switches wit...
I'm confused between the menu (Certificate>LSC) where you define CA & APs provisioning for LSC with specific MAC and the menu (AAA>AP Policies) where you can trust the AP LSC also with AP MAC. Any explanation, please?
I have a difference between the output what I get from INSSID as it should be what I saw on the Cisco WLC 5508 Software Rel: 8.0.100.0 Attached are screenshots what I mean. The WLC reports me that this SSID is using channel 48,44, but the INSSID show...
hi,please help me. Is WLC 2100 supportive aironet 2600, 3600?Thanks.
Hi, We are doing a wireless CCTV system project using Cisco wireless network. Using Cisco 1552S as RAP and another Cisco 1552S as a repeater(just repeater-for meshing only). We got total 4 IP cameras and each camera is directly connected to Cisco 1...
Hello, I read the datasheet of Cisco AP 3700 series that it can enable the MIMO 4x4 if the AP connected to PoE+ port.What configuration do I need to set on WLC/switch to enable the MIMO 4x4? Thank you
Hello, I just upgrade a WLC2504 with 3 AP (AIR-LAP1042N-E-K9) to 7.6.130 Release. Everything worked fine.Now I'm trying to add a new AP (AIR-CAP1702I-E-K9) to my WLC. Access-Point and WLC Mgmt IP are in the same VLAN/subnet. I also configured Option ...
When looking at the WLC directly, I see 15 Access Points, if I view it from within NCS Prime, I only see 7. Has anyone experienced this and/or thoughts? I've re-synced the controller several times. Removed from Prime and re-added. Nothing I have t...
Hi, One of the APs is reported to as 'keeps cycling from Blue, Green and Red'points to - ap location command invokedWhat does this exactly mean ? how do i identify which ap it is from controller. Controller model -5508AP model-1142Firmware - I am re...
Dear all ,we are using Cisco 3702i Access Point, while connecting wifi its asking credentials daily to certain mobile devices, we need bypass the portal, is their any frequency issues, we need to change the frequency range, can u plz guide me to sor...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-10-2026 11:32 AM | ||
| 08-06-2026 09:29 PM | ||
| 08-05-2026 05:58 AM | ||
| 07-15-2026 08:23 AM | ||
| 06-12-2026 07:30 AM |