Hello All,I have been looking at recommendations to enable 802.11ax in our retail wireless network. I have read about all the rewards around enabling the feature. Our deployments are typically in malls with lots of surrounding chatty wifi interfere...
Forum Posts
I'm playing with Mobilty Express. It worked great with 4 APs but now I'm stuck with a 2802i. I tried to convert it to the mobility image but it failed. Now every time I try to install a new ME or CAPWAR-Image I get #ap-type mobility-express tftp://...
Background of Cisco Spaces RunbooksAt Cisco Spaces, we aim to simplify the deployment process for IT administrators, partners, and end customers by providing comprehensive and easy-to-follow documentation. These deployment guides — known as runbook...
Resolved! Meraki CW9174i power requirements
Hi AllWe are installing CW9174i and E access points, these will be going into 9200 Mgig switches but the 802.11at 30w PoE models. I can see on the webpage for these that 30w will be fine but with reduced uplink speed or 2.4 downgraded to 2x2 etc.Have...
Resolved! Cisco Catalyst Wireless Beta Programs
Cisco Wireless Beta team would like to invite you to participate in following EFT programs Beta ProgramSignup FormEFT DatesCisco Catalyst 9800 IOSXE 26.2.1 EFT Programhttp://cs.co/2621EFT-SignupStart Date: 4th June 2026End Date: 31st July 2026Cisco C...
Hello, does anyone know if there is way to find out the BSSID information of APs on the WLC ? We are running IOS 17.15.3Thanks in advance
Hi WiFi fellows! I am struggling to make sense in how a CW9176i will be able to obtain its regulatory domain using proximity since its wireless interfaces will be disabled until it has resolved its regulatory domain. A catch 22 moment. Placing it in ...
I have a Cisco 9800 WLC running 17.12.5 and I have 1 central site (local mode APs where the WLC resides) and about 10 remote sites with APs in FlexConnect Mode and Local Authentication. Each remote site has a local authentication server with the auth...
Buenas tardes.Tengo un grupo de 3 AP C9120AXI configurados, en uno de ellos la luz parpadea en verde, azul y ambar, sin embargo el equipo esta funcionado correctamente. Quisiera saber si esa luz ambar es una señal de problemas en el AP.Gracias
Resolved! Re: Why upgrade Rommon in c9800
@Leo Laohoo Does your process work with controllers in HA SSO as well? Is there a prolonged outage during the one reboot while the Rommon gets upgraded too?To confirm, the process would be something like -1. Copy image to WLC2. Install add file3. Pre...
Seamless Wi-Fi connectivity just got better for Cisco customers using cloud-managed access points!We've fundamentally reengineered OpenRoaming — optimizing the three things that matter most: speed, scale, and control. The legacy proxy-based authentic...
This is a general question and not sure if anyone else has experience the issue we are facing. We have corp Windows PC's that are AD joined and get certificates deployed via GPO/AD without issue. This installs the Root and CA for for corp PKI infra...
Good afternoon,We have a Cisco 3504 WLC controller in our company running firmware version 8.10.196.0. I have set up a RADIUS-based Wi-Fi network with user authentication, configured as follows: - Policy: Only WPA3- Encryption Cipher: CCMP128(AES)- P...
We are currently observing an issue with a few MR46 access points running firmware version 32.1.6, where the 5 GHz band utilization frequently reaches 100% due to non‑802.11 interference.As a result:Users are automatically shifting to the 2.4 GHz ban...
I have a client needing to have a segment of the REP ring being wireless p2p link. Perhaps even more than one.I can find documentation of what is supported, is it safe to assume that all other variations are then not supported?
