Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi all,Need to know that if I have a CSACSE-1113-K9 and also i have 20 units of AIR-LAP1242AG-A-K9.Can i utilize the CSACSE-1113-K9 Appliance to as a Wireless Controller for the AIR-LAP1242AG-A-K9 ?Thanks and waiting for feedback.Md. Sariful Islam+88...
Resolved! WLC ethernet bridge
Hi,I've a WLC 2106 and it is running IOS version 7.0.240. I am trying to setup a wireless mesh and used the ethernet bridge port on the MAP to extend the network. The wireless mesh works fine but I can not get the switch to work that is connected to ...
Hi I wold like if you can help me?I´m trying to test anntenas in a AIR-CAP3062E-A-K9 the problem is that whenI´m below the AP the speed is weak, the AP es with a WLC, so I was wondering ifdo you know a command or a form to test the anntenas or the ...
Hello all, Below are the errors that i am getting while trying to register AP (2606e) with vWLC (7.3.112) .That is the error on vwlc*spamApTask6: Mar 08 18:07:24.594: #DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:681 Failed to complete DTLS h...
We have one wireless controller(Cisco 4400 series - 4402) with software version 5.1.151.0 and two access point's (Product ID AIR-LAP1131AG-N-K9 and Software Version 5.1.151.0) when we connect Ipad with IOS ver 6.0.1 ,ver 6.1.2 to a...
I have serveral 1130AG AP that when they are configured to use LWAPP all of my Motorola Handheld scanners connect to the SSIDs fine. When I have some that are on Autonomous then the scanners will not connect at all. I have upgraded a test 1130AG to t...
HelloI am looking for suggestions on how to approach an overnight upgrade from autonomous AP1231/1242 deployment into a 2504 controller-based AP1602 deployment.I do not have access to the existing 1231/1242 deployment ==> I need to ask network manage...
I have a 3602e access point which I need to configure. It has been loaded with an autonomous image (for survey work) and my only access currently is via a browser. Is it possible to http into this access point if its only been imaged and not config...
With Madhuri C.Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions of Cisco expert Madhuri C.about the new High Availability (HA) feature (that is, AP SSO) set within the Cisco Unified...
Resolved! Cisco vWLC AP platform support.
Does the Cisco vWLC support the cisco AIR-AP1231G-A-K9 platform?Thanks,Rick
Hi Community.We have a centralized WLC with some branch office with AP's in Flexconnect Mode. The Wlans are configured to use Web Authentication (Landing Page). The Landing Page is Cisco Default.We're experiencing some problem with Apple Devices, on ...
Hello,i am getting some problema with Wireless authentication. When i create a wireless account to the Radius server using LDAP the maximum users that can will use this account is almost 25.Is there any limit to set on WLC or Radius Server?A workarou...
I got an error when trying to refresh the configuration of an LWAP from PI. The error message told me to check the log files. So I downloaded the log files from PI. 1.8GB of log files, 388 file to be exact. Which one am I supposed to look at?I want...
Hi,I ordered the following part number but I need to use it on Linux. Could I?WCS-STANDARD-K9WCS Top Level SKU for AP capacity options.WCS-APBASE-100Option Of WCS-Standard-K9 100 APs. One License.WCS-APBASE-50Option Of WCS-Standard-K9 50 APs. One...
Hi,I tried using option 12 (host-name) without success. Is there any way to do this?Thanks in advance.
