Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hello,we have two WCS systems in our environment. One for US, one for EU. Now we try to consolidate them.I have already transfered some Controllers and APs to from the US WCS to the EU WCS.When i try to export and import a map i always get errors lik...
Hi,I'm ordering two standalone 1260 APs. Will I be able to convert them to capwap at a later date?Thanks, Pat.
Resolved! WLAN design guide for branch office
Hi, Is there any document that explain different designs for branch offices? I have a customer with one head quarters with more than 150 branch offices. Today he has one or more autonomous APs per brach office connected directed to the BO switch....
I can't identify the real ip address from the local wlc if the client associated to the "guest-tunnel ssid", I can only see 0.0.0.0 from the local one. The real ip address appears only on the anchor wlc. Is it correct? And if there is any method that...
Resolved! Radio or ssid on a timer
Does anyone know if there is a way to automatically enable/disable either the radios or the authentication for an ssid on a wlc? I'd want to disable at night and re-enable in the morning based on a time schedule.Sent from Cisco Technical Support iPa...
I bought a used Aironet 3502 (air-cap3502i-a-k9) on craigslist last week and the seller said it was set up for autonomous mode. It has ap3g1-k9w7-tar.124-25d.JA, which does allow it to run without a controller. I know it's not the latest version, but...
hello,I just picked up a couple aironet 1200's and was wondering if anyone has any practice labs I can play with for these?
Recently I needed to cover a 200m x 400m area with wireless network, what I had is 1200 AP and two AIR-ANT3338 antennas.I didn't have power source so I went to the POE technology as a power source for the APAfter the hardware installation the wireles...
Resolved! WLC & CAPWAPs Troubleshooting
We have 2 Cisco 4400 series WLC and a whole bunch of 1231G APs connected to it.Sometimes the wireless network get really, really slow.Does Cisco have any built in tools for troubleshooting bandwidth or sluggishness issues?And how does one go ahead an...
Hi everyone, our boss decides to purchase 1941w Router & he asked me to do the necessary configuration. my knowledge in CISCO router is a CCNA level & i've never configured an embedded AP or ADSL line on a router before.the topology is as the followi...
Hi,We have set-up in such way that client uses both wired and wireless connectivity to their laptop. Therefore they get two IP addresses to their laptop. some of the client complains that if they are running any application and in middle of the sessi...
Resolved! How to upgrade IOS for an WLC 4402
Hi,I'm currently having difficulties on how to upgrade IOS for an WLC 4402.Currently the IOS is 6.0.196.0 and uses LWAPP but we have purchased new Access point that uses CAPWAP.The release notes I have read states that I can upgrade directly to IOS t...
Can we do the same thing with WCL 4400 and 5500 series for failover? We have 1 existing 4400 WLC and we wanted to purchase another 1 for fail-over as well as backup. But right now, 4400 is EOL already. The only option is to have the 5500 WLC.So if yo...
Hello!I have NM-AIR-WLC6-K9 in Cisco 2821. Is there opprotunity to retreive configuration via SNMP as from Cisco Catalyst 2960?Kind regards,Ellad
Hi Experts, I have issue with Guest Wireless network , we have Guest (Anchor) controller connected to DMZ into Firewall, DHCP server is locally configured in Anchor controller. We have internal web authentication web page for our company but unfortun...
