Wireless

Good day all,I have a mesh network with a 4404 WCS. I have 13 outdoor 1500 APs and 7 indoor 1240 indoor APs. The network also has an ACS server for web authentication. However, users complain of frequent timeouts such that they need to login again to...

is it possible to have 802.11a and b/g enable at the same time or would that cause problems for the client.And besides having more non-overlapping channels on 802.11a is it a better option? , based on what you seen out there.Thank you

Hello Guys,When I am configuring clock or NTP on WLC 4402 it crashes and reboot. Could anybody help me to solve this. Code is 4.2.099ThanksHarish

Hi there!Where can I find the firmware that supports h323 to the router WRP400? Thanks in advance.Best regards,Jonas

Hi allwith my cisco wlc system, what do I need to enable guest access by using a style of token system that gives them a time limit etc.is this possible with cisco solution?cheers

Hostipal campus have two independant networks(wired). They plan to build two wireless networks using Cisco 5500 WLCs, for the seperate networks.The hospial plan to apply VoWLAN over the two wireless networks. The two wireless lans covers the same are...

Does anyone know when the stand alone 1140 will be available? What is the part number?

Hi all,I met following customer request:one anchor WLC 4402-12 put in the DMZ of perimeter firewall, one WiSM in the internal network to controll all the AP1252. two WLAN created at the WiSM and anchor WLC: guest wlan(web-auth+lobby admin created gue...

Hello, i have a WLC 4400 a friend formatted the flash drive with the console of the WLC. i use a Flash drive player in linux and i found 3 linux partitions and all are empty, how can i load the files necessary to the WLC can boot again.thanks

I keep getting this message during my day and can't seem to find the problem:WCS has detected one or more alarms of category Switch and severity Major in Virtual Domain rootfor the following items:Radius server '10.26.0.11'(port 1812) is deactivated ...

I have a WLC plugged into a unmanaged 8-port switch which is connected to two interface of cisco router. I also have a DHCP server. I want to create a public SSID to receive IP from one scope and another private SSID to get IP from second scope. does...

I facing a problem that using mac filtering, WPA2/AES/PSK on WLC.When I enable MAC filtering, client cannot connect it.I would like to setup a ssid that support 802.11N, WPA2 key and Mac filtering without radius server.Any people can help?I try the t...

The following is the setup.WLC 4404 running 5.2.178.0 code. 1142N LAPs. ACS ver 3.2 is the radius server and is tied to AD.I tested with three different models of laptops, two worked and one did not. The first laptop that worked: IBM (not on domain) ...

I have WLC2106 with SW 5.2.193.0. I want to configure Local Significant Certificates (LSC)enollment from Microsoft CA based on MS Windows 2008 accordig to cisco guidehttp://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080...