Wireless

Does any one know what a viop config on the 2800 router should look like?

Any suggestion on how to configure Radio Resource Management?Thank youVic

I was wondering if anybody has received this type message before ?IDS 'Auth flood' Signature attack detected on AP Cisco2 protocol '802.11b/g' on Controller 192.168.2.12.The Signature description is 'Authentication Request flood', with precedence '5'...

We have WET200 wireless bridges, which we use in vehicles with mobile data terminals, to provide a network connection. They have the most up to date firmware.Occasionally, they lockup and lose the network connection. However, as we have about 100 of ...

Hi Allwe got a some of error message from our ITP(7613). I already checked error message meaning in the cisco website.but they didn't mention anything.my curious is what does mean at the below error message and how do I do next action?*Jun 14 11:51:0...

if an ssid, intended for remote, is configured for local switching, what vlan on the wlc should the interface be configured with?we have the same topology for h-reap in the following document:http://www.cisco.com/en/US/tech/tk722/tk809/technologies_c...

Hi, allI have a problem with DHCP IP distrbution.My wireless environment is WLC2106 + 6 LAPs(1131AG).The symptom is that WLC sometimes distributes duplicated IP addresses to clients, so WLC have wrong ARP tables.Eventually, some clients which have du...

I want to assign a static IPnr to a LAP521. FYI, I'm not using a CE520 switch but an unmanaged 3com switch. Preferable I like to use CCA.

I'm unable to setup the connection between a WLC526 an a AP521 (controlled) access point. I'm not using a cisco switch in between but an 3 year Old 3com switch. Using CCA I can see that the AP has announced itself to the WLC, but the AP is not config...

Hello, I've just bought the lightweight 526 controller for lightweight access points. Along with it, I bought some four-five LAPG521. In every configuration guide I can find, it is _always_ put together with the catalytst 520 poe switch. is this a re...

Dear All,I have the below error message in my WLC and all uesrs are not able to access the network for 2 minutes19620 LWAPP-3-MIC_COUNTER: Received MIC countermeasure, WLAN 1, slot 1Any idea why such error and conuntermeasure taken by WLC

Hi,I'm having problems making the custom logo work in the 4404 webauth screen, the default cisco logo fills the space quite nicely but whatever image i seem to upload results in a light blue bar around two sides of the image.I've tried several sizes ...

has anybody experienced issues with laptops that have a citrix client installed and it keeps losing the connection.Thank youVic