Wireless

I am in the process of configurating a secure and unsecure wireless network. One SSID is in vlan 204 and the other in vlan 9. I have set the second one up as SSID in Guest mode and selected multiple BSSID. I can see the AP is broadcasting both SSIDs ...

OK,Maybe I missed this, but WCS is selecting the wrong b/g antenna by default and does not contain the exact antenna I have in the pull down menu.I am running 4.2.110.0 with loc 3.1.42 and4.2.173.0 on my wismsThanks,Eric

I have a project to build a short range link between two buildings about 800-900 meters (half a mile) away from each other using two 1250 in 802.11n mode. the design account for 2 external antennas on each side, 100 ft interconnects & lightning fuses...

Hey Guys,Need help with a 1252 in bridge mode. The 1252's are not re-associating after the non-root is dropped. Previously at the same location, the 1310 bridge would re-associate without issue. Is there a command I'm missing somewhere? Should I up t...

We have an Aironet 1200 in an office at an adjacent building. The Adjacent building is all on one subnet and has it's own WAN connectivity. Wired users are able to connect to the WAN and to resources in the main building. Users connected through the ...

HiI am right in thinking that i can apply policy based routing on a wireless interface for a cisco 881/888 ISR?

This may be a straight forward questionWhat is the difference between the location appliane and the mobility services engine?I am assuming there is enhanced functionality in the MSE over the LA however the MSE licensing is considerably more expensive...

Our customer wants to mount the antennas with two screws through the sheet metal of the antenna on the suspended ceiling.What exactly is the function of the sheet metal in the antenna ? Will my customer have less signal of that antennas? Does the ant...

WLC 4402.Is it possible to set up a WPA secured wlan where the clients receive the settings automaically ?Example: Clients see the network, connects and gets the encryption key automatically.regardsJFolkestad

Anyone know how to reset the WiSM to factory defaults? Troubleshooting FAQ suggests resetting WiSM and entering "recover-config" at the username prompt, but that did not work. I made a change to one of the gig ports and it brought down the port-chann...

I have several laptops (Dell, Lenovo, HP) and want to find if the level of CCX extensions support. I see several references to it on forums but a search on cisco.com finds nothing.

3Com CB3000 not working in a Cisco LWAPP environment latest software version . We are using tkip tls and the bridge will not always respond to the controller passing on the authentication. The cb3000 is running firmware code version 2.2.2. do you hav...

Hello,My setup:WLC 44021131 Access pointsProblem: Sometimes AP radios are shutdownTrap Logs show this:AP's Interface:0(802.11a) Operation State Down: Base Radio MAC:00:21:55:ac:29:40 Cause=Max RetrasmissionAP's Interface:0(802.11b) Operation State Do...

Hi Everyone,I'd like to ask about the IDS feature on WLC 4400 series.What will the WLC do if it detects an attack specified in the Standard IDS signature ? Will the WLC shutdown the client or just report it ?Thank you