Wireless

What are the configuration that I can have as I have orered 2 Wlan 4404 controller with same spec specially to have redundancy / failover.

I have 2 SSIDs on a 44002-12. I'm having a lot of problems switching b/t the SSIDs. The only way to switch from one to the other is to remove the SSID completely from my wireless profiles then and only then will it find the other SSID. Then I have...

In our case I have a Radius Server for Web Authentication. I have a SSID guest for Web access, of such form that any user of any group can authenticate itself like guest. In the AD to the guest group I have not associated nothing. The error that ...

My cisco aironet 802.11 a/b/g got a problem. when I put the card into the laptop, it recognize a new hardware; until installing driver...then it got freezing. I try it so many times it had the same problem. (I mean the card can't installing the dr...

Does anyone know if a 7921 Cisco WiPhone can automatically switch from a 802.11g connection to an 802.11a connection moving from a g coverage area (2,4 GHz) to an a coverage area (5,0 GHz)?

I have a 4402 WLC. There are 2 WLAN's configured. 1 is a guest wireless lan, the other a private wireless.The guest wireless lan is wide open SSID is broadcasted. No client authentication is required. DHCP is used.When I try to ping from within the g...

firmware installed 123-8.JEBHello,I use NET-SNMP to take information from AP's database agent.I want the following information:client rates (Mbps) - the current rate ofevery client connected to the access point. For example for 3 clients -> 1Mbps,5.5...

Hi,We have a customer with about 40 AP1100 and without wireless controller.These AP's are used only for voice. The customer use 7920 cisco phones.Sometimes the customer experience some blank gap in the voice. On the AP's the QoS is not implemented be...

I know this is a silly question, but is the WiSM module and the "Wireless LAN Controller" the same thing, or are they different?

I am trying to user PEAP on my AP's in the Enterprise. It works fine when used as WPA2. But when i use dot1x it gives me error 'auidentified server identity'. I am using ACS 3.3 & using self signed cert. on the ACS. The same cert. i have installed in...

works function WLAN Override in controller WLC6?, we have tried it and it does not work, is a software problem?

All, I have a WiSM module in a 6500 switch that I need to configure. I need to start the configuration of this, but Im not sure where to start on it and how to go about the configuration of this module. Does anyone know of a configuration guide for...

Hello , I am using AP 1231, to connect a my handheld to wifi lan.AP is configured for WPA security and Brodcast key rotation set to 700 seconds.My handheld is getting deauth after key rotation interval, ( i am not sure if this feature is causing deau...