Wireless

I have a 50+ access point deployment, all in a single VLAN (DMZ), across a dozen buildings. We recently experienced wierdness of the following sort. Clients would request DHCP request, DHCP servers would forward requests, which would not get passed f...

We need to connect two points with a wireless Bridge. One Point is on Bahamas and the other in Miami (57 Miles).Use: Data / VOIP We appreciate any recommendations to do this.

I press the "mode" button on the back and hold it for a while after plugging in the unit and it will not reset.Cisco AIR-AP1220 B SeriesIs there a secret to this?Thanks in advance....

We have noticed a recurring problem with some of our AP1231G's. When they are deployed, we can see the AP and see that there is a wireless connection, but are not able to transmit network data or ping the AP. However, if we cycle the power to the AP'...

Hi,After trying to upgrade the IOS of my AP1100, and waiting a long time (132 minutes instead of 5 to 15 min)... The loading of the IOS never stopped...So I unplugged my AP and now I can't connect to it anymore. Even after trying to go to the default...

Hi, I am working on the topic "convergence of wlan & 3g mobile networks" for my research.Has anybody worked on this before so we can start a dialogue?Regards,Kaustubh

Hi all, having a little problem with a 1200 series AP. It upgraded OK and everything was fine. Until I tried to upgrade the IOS, which it kempt on failing on the upgrade (IOS = lastest version). So I upgraded in the command line. now the thing only b...

hi all, i am newbie with wireless and i need to design a wireless network that shall act as a backup to the wired network in a building.the building has 10 floors.my opinion is that a 1200 (g standard) AP on each floor is suffice with a radius server...

Is their a good default setting for this?My current setting is:Optimize Radio Network For: "custom"1.0 no2.0 no5.5 basic11.0 yesOptimize Radio Network For: "throughput" setsall rates to "basic".Is one better than the other?Thanks

Iam using eap-tls on our AP1200 and ACS 3.2 but after revoking of certificate CA still Accepts Revoked Certificates. How disable access of users with installed certificate???

We have an Aironet 1200 with the latest Cisco IOS image on. Is there any place to set the AP to act as a DHCP server in the GUI (Browser-based Interface) or do I have to go to the command line?

Hi,We have a list of trusted MAC addresses in excel format. We want to implement security in such a way that whenever a user connects to the network, the ACS server will look in this list to see whether the MAC exhists or not. If it exhists in the li...

We have an AP already configured to use an ACS server. I am trying to schedule a job to add a secondary ACS server and make that secondary have priority over the already configured ACS. However, when I run the job it adds the secondary ACS but still ...

I've a strange error on my 1100 (802.11b).Every 10 minutes, I get following errors:Interface Dot11Radio0, Station <MAC> Associated Interface Dot11Radio0, changed state to up Interface Dot11Radio0, changed state to reset Interface Dot11Radio0, Deauthe...

In the process of troubleshooting an issue, I chose to unmanage and delete a device. I would like to add that device back to the Managed device pool. For some reason, WLSE will not discover this device again. Any help to re-add this device back to WL...