Wireless

I would like to monitor APradio freq to provide me an alert in case it fail, As some of my AP fail to assoc to user need to remove the restart the ap again, any body know why?RegardsMcNAz

Are there any documentation available how to handle a WLAN network on daily basis ?What I feel I need to know is:Usage (how are my network utilized)Quality (what quality does the network deliver)Availability (Is the network available for the users)I ...

I am trying to enable static WEP on my 350 series AP and a Windows XP client also using a 350 series PCMCIA card.I can associate with the AP with no encryption on either device, but as soon as I enable WEP with the same keys on both devices, I cannot...

Trying to assosiate 2 350 Bridges, when one of them was Root Bridge and the other Root Access Point, I got the following error:"Too many stations in BSS area"Changing the roles, the first one became Root AP and the second one Root Bridge, I got the a...

Could somebofy tell me if there is a way to save LEAP id and password when usign Cisco Aeronet 340 adapter on Pocket PC? I do this on Windows 2000 using LEAP Settings dialog of the ACU. However, I've been unable to find a place where I could do it on...

I have problem with LEAP authentication between my Cisco wireless group devices and Win 2k Adv Server. On my Win 2k Adv Server in EAP methods there is only one authentication methods MD5-Challenge. Maybe someone knows how to install another authentic...

Hi,How do i connect the following : Bldg A ------> Bldg C (serving as a repeater) --------> Bldg D Bldg B ------->Do i need to deploy all the wireless access point as workgroup bridge (for bldg A, B, C and D) ?Cheers,Toh CS

I have a 342 AP that when powered up, you can see it and try to associate for about 3 secs. after boot process, then it disappears and the only thing that can see it is the other 342 that is in range of it. No clients can see the device using either ...

I'm running IAS on Win2K server (added patch for PEAP suppport, box is a domain controller in an Active Directory); XP client with SP1; Cisco 352 (tried firmware 12.01T, 11.23 so far); tried both a Cisco 352 card and a Linksys card.In the event viewe...

Is ther any way to authorize client using it's logon information, using the same domain server than the one used for login pourposesThanks in advance

Hello,I have two bridges that will connect between two sites that are less than one mile apart. My question is what can I use to test signal strength and help me fine tune antenna alignment. I only have the two bridge units for this test. Any help wo...

I need to block some ports on an Access Point that I have model 350. I went to EXPRESS SETUP\Associations\IP Port Filters Tab. Is this the place that I can block specific outbound port numbers for folks trying to surf stuff that they are not supposed...

Hi,my company want to move to a new office building. As of today we run our own Cisco WLAN and of course want to move this with us. However, the new site already has WLAN implemented by another company. So my question is: is it possible for us to run...

I have an Aironet 350 running 11.21 that keeps broadcasting the SSID about 500 times a minute. Is this a software bug? I was unable to find anything like this in the Bug Tool.

Hi,Is it possible to change from an American radio system to European one that allows to use radio channels 12 and 13?Tere is any documentation regarding that? Where can i find?ThanksNuno Santos