Wireless

In researching the Cisco 802.11a products, I have seen the mention of the Aironet 1200 series which features an access point for thoroughput up to 54megabits per second for users within a building. Does Cisco offer an 802.11a bridge yet for intra bui...

While attempting a firmware upgrade on a 340 series wireless bridge, the bridge stopped responding. The status indicator LED is permanenntly red while the network indicator blinks amber. Console does not respond. Does anyone know of way to fix this?T...

Can anyone point me to some docs as to why with 802.11b you get greater distances with lower throughput. Is it because of transmit power?Newbie to wireless

When using the Bridge Outdoor Calculation Utility from Cisco i notice the cable drop down menu only includes the old STD type cables. Now Cisco have EOL'd the STD and 75ft cable, replaced with the LL cables, AIR-CABxxxLL-R products how does the calcu...

Hi, We have some Cisco 350 access points. Is it possible to make them work properly with Linksys WAP11 (Version 2.2)units? Some more details:-I have the Cisco set in "Root access point" mode and the WAP11 set in "Client access point" mode.I have done...

We have aironet 1200 APs. We use 11.42T firmwareIn the following configuration, we don' t have radio link:AP/root <------ Site Survey ClientHas anybody idea about this situation......The Antennas are good because it works in the AP/root <----- Repeat...

Currently : Using Static WEP Goal: Provide technology that is both moderately simple to implement and more secure than Static WEP.I have all Cisco APs. 20 Cisco LAN adapters using LEAP dynamic WEP. I will add 10 hand held devices plus 300 laptops usi...

Hallo,I have the following problem :I try to connect an iPAQ 3870 (with Pocket PC2002) and an Aironet PC4800 PCCard to our WLAN (AP4800 with FW V7.66).I use the actual driver 2.20.05 from your download page .But I got no association.Using the same PC...

I am having problem on setting up the repeater part

I understand that there is a provision to provide an ip addr, subnet mask, default gateway and static routes in a 350 wireless bridge..But are these options provided for routing between it's ports or are they only for ip connectivity to the bridge???...

Hi, Im from the philippines. If I want to buy a wireless bridge, what part # should I choose? is it AIR-BR350-A-K9 ?thanks for the help

We're starting to use repeaters (using 350APs) more in our WLAN infrastructure.On testing firmware upgrades locally within my WLAN lab that contains 2 root APs and 2 repeaters (all the same SSID / WEP settings) when you upgrade the firmware to the re...

Good Day, Would you please inform how to prevent multiple logons with the Cisco ACS server 3.0 for Aironet 350 environment? Although the option "Sessions available to user" = 1 is configured in both group and user settings on the ACS server, however ...

Hi I have a number of BR340 that power on and they stay up for approx. 30 - 120 seconds then die, and after another 30 seconds they power on again and start the cycle over.They are all using external power supplies. We have installed 15 on this site ...

Overall, the Dynamic LEAP 128-Bit RC4 encryption is just as strong as the static 3DES key, if not stronger. However since LEAP iss not FIPS complaint, we must use 3DES VPN through the WLAN in US government and DoD. Is there any push to certify LEAP o...