cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
684
Views
0
Helpful
1
Replies

A9K-MPA-4X10GE is not allowed

isbou1986
Beginner
Beginner

Hello,

I'm new in this forum, and I've been searching a solution for my issue I did not find any, so I decided to post my own and hope that someone can help me to solve the issue.

As per the subject, I have inserted one A9K-MPA-4X10GE in my router which is running on IOS 5.3.1[Default], the issue is that the card is not coming up. When I type show platform I have below output

 

Node      Type                     State                        Config State
-----------------------------------------------------------------------------
0/0/1 A9K-MPA-4X10GE NOT ALLOW ONLIN NPWR,NSHUT,MON

 

 

 

Any one can help me to find why I have this situation and how to bring up the card so that I can use interfaces.

Thanks in advance.

 

Regards

1 Reply 1

nkarpysh
Cisco Employee
Cisco Employee

Hello,

 

One possibility is that you may need to have a license in order to activate the slot. see below link:

https://www.cisco.com/c/en/us/products/collateral/routers/asr-9000-series-aggregation-services-routers/data_sheet_c78-728237.html

 

Two integrated 10 Gigabit Ethernet SFP+ ports and the Bay 0 slot is enabled by default in the Cisco ASR 9001-S. Another two integrated 10 Gigabit Ethernet SFP+ ports and the Bay 1 slot can be enabled by applying an upgrade license.

 

Hope this helps,

 

Niko

HTH,
Niko
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers