Hi, Guys, I'm facing a problem on BGP with IPv6 family unicast, Router A with IOS-XR and Router B has established the BGP IPv6 neighbor but they're not able to advertise the prefixs(IPv6 address of loopback 0) to each other.BTW, they're not in the sa...
Hi I would like to find the temperature threshold value of ASR9010.admin show environment temperature, it shows only current temp value.admin show environment table will only have critical value, no minor and major value.Could anyone provide me this ...
Hello,I'm experiencing behavior on the NCS540 whereby interfaces which physically exist are being moved to preconfigured interfaces once configuration is added. Interfaces now "missing are ten0/0/0/2, ten0/0/0/3, ten0/0/0/17Example RP/0/RP0/CPU0:VFW...
Hi all,l am running a 9001 IOS-XR image - Currently 6.1.4I need to upgrade this to 6.6.3 , but I am unsure of the upgrade path, can I go straight from 6.1.4 to 6.6.3/6.7.1 or will have to increment to specify versions?- l checked the Cisco download p...
Hi, I've been trying to configure 88a8 to my ASR 9906 with SVLAN 500 and with no CVLAN tag. Upon testing, the NNI port facing my partner equipment is not getting any mac address. I just need to sent SVLAN 500 to my partner using 88a8. Below is my c...
Hi, I've been trying to work this out. Can QinQ and VLAN Transparency co-exist on a single port? I have this on my Configuration but is seems to only work with VLAN Transparency. interface GigabitEthernet101/0/0/0.100 l2transportencapsulation def...
Does anyone here uses IOSXR Flexible Model? How does ESS-ED-100G-RTU1, ADV-ED-100G-RTU1 works for the licensing? Is it by port basis? If I have a 20 x 100G ports on a line card. Should I have 20 Licenses to enable all the ports on this? Or is this o...
Hello:Which Cisco router platforms use IOS XR?Is it just the CRS-1, ASR 9000 and GSR 12000? What about the asr 1000?What is the big difference between regular IOS and IOS XR?What is the ASR 9000 used for? WAN edge? SP PE? SP core?So for so many quest...
When would this FAN be required for a 9006 system? I see PEM-V3 on Cisco site but nothing on the V3 Fan. Anyone have any links or input? Greatly appreciated!We are currently testing the RSP-5 we got on loaner. We have used Classic 32 bit only and...
Hi community!We have a couple of ASR 9901 with IOS XR 6.6.3 (all SP and SMUs, i hope). The ASR9k box is connected in a chain of PTP G.8275.1 and the chain is using SyncE as frequency synchronization. I my knowledge, we do have PTP and SyncE working. ...
Hi all!I would like to understand how to work with boot software in IOS XR. This is the configuration guide I'm checking: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-6/rom-monitor/configuration/guide/b-rommon-cg-asr9000-66...
Hi,My name is Steve; I am just out of the box with CISCO 9300 @24T.The issue I have in front of me is a team member remoted into a CISCO 9300; installed cat9k_lite_iosxe.16.12.04.SPA.bin, a lite version, not the full version, and the switch will only...
So I picked up a used 2911 to replace my aging 3825 that I use for home router and intercom system via low end cisco 69xx voip phones. Was hoping the newer unit, advertised with CME 12, would let me maybe upgrade my phones to something more colorful....
Hello everyone, I have two A9K devices, they are same config of snmp, but RT1 can trap syslog to snmp server, RT2 cannot trap syslog to snmp server. I guess it will be a software issue. Is there any suggestion to troubleshoot this ? I want to restart...
