About acampbell

acampbell · 06-07-2016

Hi, Can any one tell me what the "check=" means when viewing an access list ? show access-list 1permit 1.2.3.4, wildcard bits 0.0.0.1 (232 matches) check=2781permit 1.2.3.4, wildcard bits 0.0.0.1 check=3013 I cant find anything in google about my que...

acampbell · 08-01-2013

Hi,When I click on Account ---> Discussions The view only shows discussions that I have started.Up till a few weeks ago it also showed discussions that I have taken part in.My filter is set to Your DiscussionsBelow is a list of discussions you h...

acampbell · 02-22-2012

Hi,I wonder if it would be (or already is) possible to have an auto signature added to our postings.Similar to email.I uaually finish my postings with something like :-HTH/RegardsAlexPlease rate useful posts.

acampbell · 05-29-2003

I want 2 Attendant Consoles (Operatorss) to be able to manage the same pool of lines.My pool of lines is a pilot point 2000. I want both operator to be able to answer all calls that arrive for 2000.Is the answer to use share lines on the operators ph...

acampbell · 02-12-2002

I have 2 clients here in Scotland with AVVID (Call Manager)solutions.Both clients have there networks built using 3524PWL CATS onthe edge serving the IP phones.I have the same problem at both sites.When using internet explorer 5.5 or CWW to access vi...

acampbell · 06-09-2025

Hi, The 1st point I see is that you show the original MAC address = 01d2.34a7.59b1Mac addresses actually starting 01 sre reserved for muticast .. I think you need to recheck as you are missing a pair of digits.Your MAC needs to be 14 digits for stati...

acampbell · 05-29-2025

Hi, From your term server, Can you try TERMINAL-SERVER-RASDIKA#telnet R3 If you want to short cut the long command to just R3 you will need to write an alias line in the config conf t ! alias exec R3 telnet R3 end Hoe this helps

acampbell · 05-29-2025

Hi, I think you need to have a good look at this document to see the options for what you are trying to achieve:- Cisco Unified Border Element Configuration Guide Through Cisco IOS XE 17.5 - High Availability on Cisco 4000 Series ISR and Cisco Cata...

acampbell · 11-21-2024

Hi, Only C9300s witch C9300s C9300L with C9300L Only C9200s witch C9200s C9200L with C9200L The all have different backplane characteristics

acampbell · 11-21-2024

Hi, If you do not want a default gateway then try adding a staic route instead.You will need to sort the specifis yourself as you have nlot given enough detail re masks etc. This would give a specific route from switch 10.45.2.5 back to host 10.45.0....

Member Since	‎11-28-2001 02:21 PM
Date Last Visited	‎06-12-2025 01:21 AM
Posts	2,862
Total Helpful Votes Received	2037

User Statistics

User Activity

Show access-list - reports check=

Problem with viewing "DISCUSSIONS".

Postings Signature

Multiple Attendant Console Working

Still having Browser/password problem on CAT 35xx's

Re: dhcp and arp problem

Re: Terminal server on ISR4321

Re: Cube HA ISR 4431configuration question

Re: Compatibility of Stack Kit C9200L-STACK-KIT with Cisco C9200-48T-E

Re: Catalyst 9300L-48T-4G-E Switch, Routing Issue SVI becomes unreacha