Dears, I'am using FTD 6.6.1 managed with FMC, i Configured Internal Certificats, Trusted Certificat, add DNS target with the routed interface, configured the Identity Policy, added it to the Access Policy and allowed it.When now i go the user compute...
Hi to all,there is a port-channel interface that has various sub-interfaces (vlans).The FTDs are in a high availability pair.I have configured one specific vlan interface with primary and backup ip.The problem i have is that when i disable this vlan ...
I have ASA with Active/Standby configuration. I can see the primary is active and the secondary is standby ready. also, the configuration is replicated. When I try the command "no failover active" to make the active work as standby, in order to go w...
Dear Community,i want to deploy the FMC on our Hyper-V Failovercluster. to mange our new Cisco Firepower 3110 Firewall. I followed this Guide: https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/fmcv/fpmc-virtual/m_deploy_the_managem...
Hi, I'm running an ESXi hosted Lab. I've got 3 FTD's managed by an FMC, and I'm using an Elementary OS Linux client to run a browser. I've created a rule to interactively block Social Media URL's. If I select "interactive block", the web page is s...
Is there a way to reset the data inside interface? After a reimage to "Cisco-ftd-fp1k.7.2.8-25.SPA" the setup wizard was bypassed (not by me) and the 1010 got configured to use "Use Unique Gateways for the Management Interface". This was an incorrect...
Hi All,I have a small problem regarding ASA and syslogs. I have a site-to-site tunnel between a local ASA and a remote ASA. Behind the local ASA I have a central syslog server (which does not have the ASA as a default gateway) which collects messages...
my company lost its engineer who dealt with this we are in the middle of getting a new one but for now I need a site-to-site VPN setup and I'm at the point where it's up on both ends but my FMC config somewhere is blocking the VPN I ran a packet Trac...
FMC docs state it runs on ESXI 7.0 but nothing higher unless I missed something.
hi, when ever I'm using cisco asa in eveng NOT the ASAV, most of the time the asa it is not showing any interfaces but once in a while is shows interfaces, anybody has any idea of remedy it ? Thank you.
HiMy name is Josip and I am a student.I am currently working on a project about use of AI in computer networks.I finished teorietical part, but i did not found any real-world examples on the internet about using AI in network security.I wonder if som...
Recently we renewed Public CA certificate from Entrust to DigiCert for ISE system EAP Authentication, and since then, devices have been failing to authenticate via EAP-TLS. These devices obtain endpoint certificates through the BYOD portal. This is h...
Hello,I have a firewall 1120 ASA series and I am not understanding how the initial device works. I first want to change the management IP. Is that going to be Managment1/1 interface? Assuming it is, I can ping that new ip i made. How do I ssh to the ...
hi,just confirming if the ASA5555-X PSU is hot swappable?i don't see it indicates OIR/hot swap in cisco doc/linkhttps://www.cisco.com/c/en/us/td/docs/security/asa/hw/maintenance/5500xguide/5500xhw/asa_overview.html#198262.If you are replacing a power...
Hello,I have a firewall 1120 ASA series and I am not understanding how the initial device works. I first want to change the management IP. Is that going to be Managment1/1 interface? Assuming it is, I can ping that new ip i made. How do I ssh to the ...
