Hi, does anyone know if DLB would make use of several ways across the IPN in a Multi-Pod enironment? Documentation only states that it is used on the uplinks of the leaf switches, so I guess they are completely unaware of the IPN and thus would sti...
Forum Posts
Resolved! Cisco ACI IPN configuration
We are attempting to configure a multipod environment between our main site and a DR site. We are going to use IPN to connect the two PODs. I am trying to configure the Cisco 93180 YC-EX and am not well versed in NX-OS or ACI enough to do so. D...
Currently the only way to match EPs into an EPG is using VLAN, as we don't have VMM integration to use useg, there are HP enclosures that have limitation of 128 VLANs and we reached that limit, so now we are stuck in creating more EPGs. Does anyone...
(Edit: Updated info and answered some of my own questions after hitting the lab) Hello all. I had an interesting request come across my messy desk yesterday, and I wanted to get some thoughts on this. Background One of our server teams has chose...
For test purposes, I have set up EP to Ext IP Atomic Counters. Surprisingly, the operational statistics show 50% packet drop, which absolutelly does not seem relevant. - The ACI endpoint 10.50.6.100 is of type L3 and it is a single port (no port-chan...
Hello, I am trying to install VPC-SI iso file and everytime i select install i get the following error: Cannot install from this console Any idea what could be the error
Hi community,I try to clear Fault 1394 (Port is down, reason:sfpAbsent(connected), used by:Fabric) by temporarily setting the Fault severity to squelched. This fault message is a result of moving the Leaf Uplink cables to a different port. I go to Sy...
is there a way to configure different L3out in same border leaf? All the document use tow different L3out in tow different border leaf. I had a lab setup 2 different L2out with BGP to as ACI transit setup (with BGP peering). But I have trouble to ad...
Resolved! Source and destination IPs in ACL
How to configure source and destination IPs in a filter for a contract in aci apic as we used to do in access-lists?
Hello guys! is there any way to configure priority in a epg or BD in order to select a L3out over other? We have 2 sites in a streched fabric configuration, and we need that the host in site 1 choose l3out of its site, not the l3out of the other site...
I have my L3OUT to my EIGRP router and my EPG subnets on the that router are showing up as external routes. I thought they would be listed as internal since they are part of the same network. Where do I change the setting in ACI to make sure the EP...
Hi board, I'm pretty new to ACI and I'm struggling with a very basic problem: How to properly configure an leaf access port? From my point of view there are too many ways to do it and I'm interested what's the right way to go. Let's assume the foll...
Hello, I need to change the OoB Management Address after the initial setup. This should be done on all three APIC controllers. I try to do this with the bash command "ifconfig" but even I was logged on as admin I don't have permission to change t...
Hi guys, I am trying to find a way to configure service graph for ASA in unmanaged mode with sub-interface. There will be port-channels connecting between ASA and Leaf, and I want to configure sub-interface on port-channel, each sub-interface is be...
Network :- 10.0.10.0/24 EPG App:- 10.0.10.100 EPG WEB:- 10.0.10.150 EPG DB:- 10.0.10.200 VLAN :- 100 with the above information, Can we map given IPs to required EPGs with Static port mapping( ENCAP-VLAN ID) Thank you in advance
