Application Networking

We are running the latest code of WAAS and what I want to do is have all edge locations act as core as well. We have 10 locations and each location has critical servers that need to communicate (ie. file replication) with each other. I understand thi...

icmp reply isn't displayed if I enter tracert command from a client pc to a router through ACE module.it's displayed as ***** (not a ACE ip addr).. I think ACE module wasn't confugured to send any icmp trace reply..How can I configure ACE to receive ...

Primary serverfarm with stickiness (cookie insert) goes down. Backup serverfarm kicks in with sorry servers. Primary serverfarm comes back up and returning connections still get serviced by the backup farm. The reason for this is explained in the loa...

is possible for load balance from client to 2 different segment. Scenario : Vlan 20 have 2 Server, Vlan 40 have 2 server.For the normal condition traffic should be load balanced to server in Vlan 20, but when the server in Vlan 20 down (2 server down...

I have a question regarding the bit-level caching which Cisco WAAS performs. In our scenario, we're going to have a central site with a WAE-7326 or WAE-7341, and many (dozens) of remote sites with WAE-512 devices. Data transfer between all the sites ...

We recently had a penetration test and the CSS was flagged as port 12176 being open on the interface of the CSS device itself.What is this port used for?

Is it really required to have servers connected directly to the CSS with the CSS VIP(s) as their gateways? Can we not simply configure our ASA for static-NAT to the VIPs on the CSS, with the servers using the ASA DMZ int as their gateway? What do los...

I have a need to use 1 CSS to balance server farms that reside on 2 different PIX segments. So Internet traffic destined for a server farm on "DMZ 1" would be balanced and traffic destined for a server farm on "DMZ 2" would be balanced through the sa...

In the CSS can we using other ports :example : client access https://10.10.192.100:7777 ??how for the content configuration ?

Hi expertsDoes Cisco have some Web Cache solution similar to NetCache solution?Can I use the WAE-612 + WAAS software as web cache solution?Thanks in advancemasterson79

Hi, I installed and associated my cert on my CSS, but am having problems getting it working...What I need is to be able to browse FROM my web server 192.168.10.1 to a specific website which provided me with the cert 'myRSAcert' below. I have implemen...

Hello I want to monitor backend server cpu (or MEM) loading on CSS , I find out there are DFP and SASP protocol , But seems that they can be used on UNIX server, But my server are Windows based , How can I archieve this ?

Hello I have a question , I have configured Sticky-inact-timeout (ssl sticky)for 30 min and Service LOAD reporting if one of the backend ssl server become busy , it means Load reporting will let fewer connections to the busy server , But now because ...

Hello forum!I recently bought a Cisco 1801, and it sure is capable! Anyhow, I've got a hobby website that is getting a fair bit of traffic - approaching too much for one node to handle and it's time to start thinking about distributing the load.I'd l...

Should be a simple question and I hope I have the answer, just want to see if someone can verify this will work. This is on a CSS 11501 with 8.2 code. Have to be sure the client data flows which are served by the same 2 servers but with different VIP...