Application Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

Resolved! WAAS 5.3.3

Hi,Testing 5.3.3 in our lab.I have a CM (274), Core (594) and edge (274).The issue is that the routers cant see the WAE. I made sure the i have right wccp password etc...Interception is wccp. I use WCCP GRE as both redirect and egress method.What am ...

Srin_G by Level 5
  • 2266 Views
  • 4 replies
  • 0 Helpful votes

Hi,I have a Central manager version below and I wanted to enable SNMP traps for WAE Alarms namely Minor, Major, Critical.Wide Area Application ServicesSoftware Release 5.1.1a b4Configuration has been enabled as follows:snmp-server enable traps alarm ...

Hi everyone.. I have a situation where a customer is moving from a legacy F5 to Cisco ??  Anyway the web site uses only http  and the rservers only listen on 80  also.   but the customer wants to have the URL re-directed or re-written so for example:...

normbeef by Community Member
  • 1906 Views
  • 4 replies
  • 0 Helpful votes

Hi,Will the waas express running IOS c2900-universalk9-mz.SPA.152-3.T1.bin in edge sites will work without issues if the core WAE in the data center is upgraded to 5.3.3?Currently our core WAE is running 4.4.5c!please advise.regards

Srin_G by Level 5
  • 1464 Views
  • 1 replies
  • 0 Helpful votes