Application Networking

    Is it possible in below condition ?           Client request vip 10.10.10.5:1099 and CSM play loadbalancing to the rserver (20.20.20.5:1099)    I knew that CMS refer mac address of rserver when play loadbalncing and above condition isn't in same ...

I just recieved an evaluation report from a Pen Test done against my load balancers. What they called "Web Server vulnerable to slow HTTP Denial of Service attack". Their explanation for this is "Hardware load balancer should be configured for delaye...

I has gone through all other thread that showing major alarm, it said that deleted the files in local1/core_dir or local1/crash will remove the alarm, but i just did the same thing, still the alarm show as below:WAE#sh alarmsCritical Alarms:---------...

We have 2 WAAS central managers in our deployment in different data centres. The secondary has recently been removed as it was EOL and a new WAVE594 bought to replace it.Unfortunately the old standby central manager is still listed in the primary cen...

HelloI wandered if someone can help me with this query.If i set up a VIP with rate-limiting, i want to be able to send the ops a team an alert to say the threshold has been reached, is this possible by syslog or snmp traps? Or what is the best way to...

Hi,When ACE receives for example: www.cars.department.com.br , we need the url was changed to www.cars.department.com.br/dept-cars/The host remains the same.How can I do this ? Action-list http header rewrite / insert ?Thanks

Hello everyone!when ACE WAF is terminating SSL connections, what logic is used to select cipher suite? Could this be influenced by configuration?My specific objective is to use CBC as last resort only due to CVE-2011-3389 vulnerability.For example, c...

I am new to Nexus 1000v and have learned a lot and managed to get my one system working with a couple VM Guests. I used the Installed that came with 4.2.1 SV2.1.1a and did a Dual VSM setup. The installer had some issues after the Primary was configur...

Hi All,Anybody know if inbound QoS can be configured on WAAS appliances ? I understand Riverbed Steelhead WAN optimization appliances have inbound QoS capabilities and I am wondering if we can do the same with WAAS appliances. Thanks all in advance !...

Hi Guys,Has anyone encountered issues with Passive FTP and waas? We have IOS ZBF (1941) and WAAS setup. If we remove the wccp statements in the router it works ok, but if we put it back it fails.Currently we are doing more testing in the lab to isola...

Hi,I'm having 2911 routers with Cisco WAAS module installed. While configuring the WCCP on the 2911 router, I see additional interface tunnels gets automatically created once I issue ip wccp 61 and ip wccp 62. It gives these tunnel ip address from 17...

Hello, world!We have weird behaviour of our Cisco ACE20 module configured for end-to-end SSL (initiation+termination) - the module from time to time replies with SSLv3/TLSv1 alert "Fatal: internal error" message to the client right after client have ...

What is the command to add another vlan on a fex interface for ip phones. One vlan for the phone and another for the pc.Thank you.Sent from Cisco Technical Support Android App